This Week
Get Alerts ›
cvehawk_ Get Alerts
Software · Linux kernel

Linux Kernel Vulnerabilities

The latest Linux kernel security flaws, which ones attackers are using to take over servers, and how to keep your kernel patched.

New flaws, 30 days
896
Critical, 8 weeks
17
On CISA's exploited list
28
Latest exploited
28 Oct 2026

Linux Kernel Security in Short

Since the kernel team became its own CVE authority in 2024, almost every kernel bug fix gets a CVE, so hundreds appear each month. Most need local access or unusual hardware. The ones that matter are on CISA's exploited list: usually flaws that let someone with a foothold, such as a hacked website, become root. Fragnesia is one.

How to Keep the Kernel Patched

  • Install kernel updates from your distribution: apt full-upgrade or dnf upgrade kernel.
  • Reboot. A new kernel does nothing until the machine restarts on it. uname -r shows what is running now.
  • If reboots are hard to schedule, live patching (Ubuntu Livepatch, kpatch, KernelCare) covers the serious flaws in between.
  • Keep to a supported kernel line. Distribution kernels get fixes for years; a hand-built one gets none.

The Past Eight Weeks

Any Score 7+ 8+ 9+

341 flaws scored 7+, newest first · page 1 of 7.

7 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tun: Require CAP_NET_ADMIN to attach to a… CVE-2026-99281 7.8

In the Linux kernel, the following vulnerability has been resolved: tun: Require CAP_NET_ADMIN to attach to an ownerless device Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap devices.") The idea was to allow the permissions on /dev/net/tun to be relaxed to 0666 and thus allow owners of tun devices assigned with TUNSETOWNER to actually open it and get at their devices. What we missed at the time was that persistent devices with *no* owner were already essentially world-consumable, and anyone who could open the device node could also attach to those. Even then, using persistent devices with no explicitly set owner — on the (false) presumption that CAP_NET_ADMIN would be required to open them — wasn't an egregious userspace bug. There are cases where it does make sense to separate the creation/configuration of the netdevice, from the process which shovels packets into it. Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e ("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message noted that if both uid and gid are set, both have to match (in itself a bizarre choice) — but still not that with *neither* set, no permission at all was required. Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed new queues to be attached to a device from the moment of its creation, with no way for userspace to close the race between creation and a subsequent TUNSET{OWNER,GROUP}. In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried to fix things to be saner: only require the user *or* the group to match, in line with standard POSIX permissions, and require CAP_NET_ADMIN if neither the user nor group authorised the access (although it put the CAP_NET_ADMIN check first, and would wrongly have reported the capability as having been used even when it was not). That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group permission check") due to allegedly causing a regression in an selinux test suite which *expected* the attachment to succeed when authorised by none of user, group, nor CAP_NET_ADMIN: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/ We should not break UAPI. But we don't have to consider an selinux test case which deliberately exercises a security flaw to be UAPI worth preserving either. To which end, I have fixed it in selinux-testsuite commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the relabel tests"). So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been assigned an owner or group, while leaving the weird tun ownership model as it was (user *and* group have to match, if both are set). If someone still wants to fix the latter (which wasn't actually the reason the previous attempt was reverted), they can do it under separate cover. Permit attaching to an existing device only if an owner and/or group was set and the caller matches all that were set, or if the caller has CAP_NET_ADMIN. The only behavioural change is that a device with no owner or group now requires CAP_NET_ADMIN to attach — precisely the loophole we want to close. And put the CAP_NET_ADMIN check in the right place this time.

Patch this week · NVD Record

7 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ksmbd: hold a connection reference for ea… CVE-2026-99277 7.5

In the Linux kernel, the following vulnerability has been resolved: ksmbd: hold a connection reference for each session channel ksmbd_session_unregister() removes a session from the global and per- connection tables before dropping the table reference. A concurrent reference holder can keep the session and its channel list alive after those removals. Connection cleanup can no longer find the unpublished session to remove its channels. Since a channel only stores a raw conn pointer, the connection can be freed while another session reference holder is still accessing it, for example during SMB3.1.1 binding or a procfs read. Take a connection reference when registering a channel and release it on insertion failure, channel removal, or final session destruction. Keep the channels and signing keys until the session is destroyed so a response can still be signed after the session has been unregistered.

Patch this week · NVD Record

6 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: xen-netback: defer xenvif_mcast_addr_list… CVE-2026-100081 7.8

In the Linux kernel, the following vulnerability has been resolved: xen-netback: defer xenvif_mcast_addr_list_free() In order for the function to legitimately avoid locking/RCU, it needs to run after all TX/RX processing has finished/stopped: Lookups happen from xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action() (called out of xenvif_poll()). Move the call out of xenvif_disconnect_data() (the call to the function from connect()'s error path doesn't require any cleaning up there), and put it past the synchronization point in backend_disconnect(). This is XSA-527 / CVE-2026-100081.

Patch this week · NVD Record

3 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tipc: protect node reset trace dump with … CVE-2026-99246 8.1

In the Linux kernel, the following vulnerability has been resolved: tipc: protect node reset trace dump with node lock The tipc_node_reset_links trace event asks tipc_node_dump() to walk the node's link entries. Unlike the other node events that request link data, this event runs without the node lock. This permits bearer teardown to free a link while the trace callback is dumping it: CPU 0 CPU 1 trace_tipc_node_reset_links() tipc_node_dump() l = n->links[0].link tipc_node_write_lock() kfree(l) n->links[0].link = NULL tipc_node_write_unlock() tipc_link_dump(l) tipc_link_dump() then dereferences the stale pointer. KASAN reported: BUG: KASAN: slab-use-after-free in tipc_link_dump Read of size 4 by task poc/115 Call Trace: tipc_link_dump+0x10cb/0x16b0 tipc_node_dump+0x4bb/0x740 trace_event_raw_event_tipc_node_class+0x258/0x360 tipc_node_reset_links+0x14d/0x1a0 tipc_rcv+0x13f5/0x3030 tipc_udp_recv+0x4e3/0x670 Allocated by task 0: tipc_link_create+0x1e1/0x1020 tipc_node_check_dest+0x7d2/0x11a0 tipc_disc_rcv+0xdbf/0x1430 Freed by task 89: kfree+0x131/0x3c0 tipc_node_link_down+0x267/0x4b0 tipc_node_delete_links+0xec/0x160 bearer_disable+0x107/0x260 Take the node write lock around the trace event. This serializes the dump against tipc_node_link_down(delete=true), which frees the link under the same write lock.

Patch this week · NVD Record

3 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tcp: Fix potential UAF in reqsk_timer_han… CVE-2026-99270 8.1

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix potential UAF in reqsk_timer_handler(). When TCP socket migration fails at inet_ehash_insert() in reqsk_timer_handler(), we jump to the no_ownership: label and free the new reqsk immediately with __reqsk_free(). Thus, we must stop the new reqsk's timer before jumping to the label, but the timer might be missed since the cited commit, resulting in UAF. As we are in the original reqsk's timer context, we can safely call timer_delete_sync() for the new reqsk. Let's pass false to __inet_csk_reqsk_queue_drop() to stop the new reqsk's timer.

Patch this week · NVD Record

3 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING … CVE-2026-99269 7.8

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before moving tasks off DSQs A task can be found on a non-local DSQ while the CPU which dispatched it is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING. The DSQ consume and move paths don't wait for the dispatch to finish and can operate on the task concurrently with the dispatcher. Call scx_wait_dispatching() in scx_move_local_task_to_local_dsq(), unlink_dsq_and_switch_rq_lock() and move_task_between_dsqs() before they operate on the task. In scx_move_local_task_to_local_dsq(), wait before scx_resolve_local_dsq() as it may update p->scx.flags.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: prevent cancel reference… CVE-2026-99227 7.8

In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: prevent cancel reference wrap io_waitid packs the cancellation state into bit 31 of ->refs and uses bits 30:0 as a 31-bit reference counter: #define IO_WAITID_CANCEL_FLAG BIT(31) #define IO_WAITID_REF_MASK GENMASK(30, 0) __io_waitid_cancel() marks a request canceled, then increments the low bits of ->refs to claim completion ownership. When another path owns the request, the increment remains even though cancellation returns false. The request remains discoverable by cancellation, so repeated failed attempts can wrap the 31-bit reference field to zero. A later cancellation can claim ownership and complete the request a second time. Use atomic_fetch_or() when setting the cancel flag and inspect the old flag value. The first cancel attempt continues to the existing ownership increment, preserving its wake and issuer handoff semantics. Later attempts see the cancel flag and return without incrementing the reference field. This makes repeated failed cancellation attempts idempotent while leaving the first-cancel state transitions unchanged.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: own the request before c… CVE-2026-99231 7.8

In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: own the request before clearing ->head io_waitid_remove_wq() only takes the wait queue lock if ->head is set. io_waitid_wait() clears ->head first thing, before it tries to become the owner of the request by bumping ->refs. If somebody else owns the request at that point, nothing keeps it from completing the request while the wake up handler is still going to touch it: CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref) list_del_init(&wait->entry) smp_store_release(&iw->head, NULL) __do_wait() finds another child io_waitid_remove_wq() // ->head == NULL, no locking io_waitid_finish(), IOU_COMPLETE // request freed and reused atomic_fetch_inc(&iw->refs) The same goes for __io_waitid_cancel() if it claims the request in that window. ->refs is part of the per opcode data of the request, so this increments whatever the next user of the request keeps there. If that happens to be zero, the handler concludes that it owns the request, and queues io_waitid_cb() for it. With the window held open by a delay, and the request reused for a receive that is waiting for data: BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0 __wake_up_sync_key+0x36/0x50 sock_def_readable+0xf1/0x420 unix_stream_sendmsg+0x60b/0x1110 Allocated by task 87: io_arm_apoll+0x1ed/0x940 Freed by task 87: __io_submit_flush_completions+0x118d/0x1a10 tctx_task_work_run+0x327/0x950 Only clear ->head once the handler owns the request. If it doesn't, the owner finds ->head set and has to wait for the lock, which is held by the caller of the handler. Deleting the already deleted entry again is harmless.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Verify event_call ide… CVE-2026-99233 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Verify event_call identity when updating synth_event refcount In event_hist_trigger_parse() and hist_unreg_all(), the histogram registration and unregistration paths look up find_synth_event() using trace_event_name(file->event_call) and adjust se->ref if a match is found. Because find_synth_event() only compares the event basename, registering or removing a histogram on a non-synthetic trace event whose basename matches a synthetic event erroneously modifies the synthetic event's reference count. If a histogram is registered on the non-synthetic event before the synthetic event is created and removed afterwards, se->ref is decremented without a matching increment, allowing the synthetic event to be freed while an active histogram action still holds a pointer to it. Introduce find_synth_event_call() to verify that &se->call matches file->event_call before adjusting se->ref.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Save the event file instead of t… CVE-2026-99235 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing: Save the event file instead of the compatible histogram create_field_var_hist() creates a histogram on the matched event to supply a field variable, and records it on the target so it can be torn down later: hist_data = find_compatible_hist(target_hist_data, file); ... /* Save the compatible histogram information */ var_hist->hist_data = hist_data; hist_data is not the histogram it creates. It is one that was already there, whose keys the new one copies. The saved pointer has a single user, unregister_field_var_hists(), which runs when the target is removed: file = hist_data->field_var_hists[i]->hist_data->event_file; find_compatible_hist() matches on keys alone, so it can pick one with no variables of its own. check_var_refs() then returns false and the user can remove it while the target still points at it: BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320 Read of size 8 at addr ffff8880093b90e0 by task init/1 Freed by task 1: kfree+0x154/0x420 event_hist_trigger_free+0x1d5/0x320 event_hist_trigger_parse+0x35f3/0x69e0 trigger_process_regex+0x1a6/0x250 Save the event file instead. It is all the dereference ever wanted, and it does not go away when the user removes a trigger.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Reject incomplete event filter e… CVE-2026-99236 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing: Reject incomplete event filter expressions A non-empty expression normally finishes in predicate_parse()'s inner loop, which resolves the pending logical operators before jumping to finalization. If the input ends after an operator, possibly followed by unary '!' tokens, the outer loop instead falls through with unresolved operator state. For example, "common_pid == 1 || common_pid == 2 &&" leaves prog[0].target equal to -1. The second pass then reads prog[-1] before the forward-jump check can reject it. Depending on adjacent slab contents, it can also copy an out-of-bounds word into a branch target that passes the forward-only check. A self-targeted perf tracepoint counting event can reach this path through PERF_EVENT_IOC_SET_FILTER. Reject the outer-loop fallthrough when a predicate has already been parsed. This ensures that non-empty expressions only reach finalization after the inner loop has resolved their operators. Keep the existing no-filter error for input that has no predicates. Add a regression test for trailing logical operators and unary negations.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when reset… CVE-2026-99237 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when resetting last boot data from readers update_last_data_if_empty() is called from tracing_open() with O_TRUNC, tracing_read_pipe() and tracing_buffers_read() without trace_types_lock. Two readers can both pass the LAST_BOOT test and free module_delta twice, and a module notifier can update module_delta while it is being freed. Take trace_types_lock in those paths and keep the callers that already hold it on an unlocked variant.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when updat… CVE-2026-99238 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when updating modules in persistent instances trace_module_record() walks ftrace_trace_arrays from the module notifier without trace_types_lock. A concurrent rmdir of an instance removes it from the list and frees it under that lock, so a module load or unload can walk into a freed trace_array.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: refuse __l2cap_chan_add… CVE-2026-99239 7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn l2cap_chan may be linked to l2cap_conn at most once. This is assumed in several places, eg l2cap_chan_del cleanup. There is a TOCTOU race where the invariant is violated: [Task 1] [Task 2] l2cap_chan_connect l2cap_sock_bind l2cap_chan_lock lock_sock l2cap_state_change if (sk->sk_state != BT_OPEN) chan->state = BT_CONNECT l2cap_sock_state_change_cb chan->state = BT_BOUND sk->sk_state = BT_BOUND lock_sock <------------------ release_sock sk->sk_state = BT_CONNECT l2cap_sock_connect() does not check sk->sk_state, so since chan->state is now BT_BOUND, subsequent connect() ends up with second __l2cap_chan_add. Explicitly document and check the invariant in __l2cap_chan_add with WARN_ON_ONCE. The only callsite where it could be hit is l2cap_chan_connect, so add pre-check there to avoid relying on chan->state. chan->state read/write is not properly guarded currently so there can be other TOCTOUC problems. Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: coredump: hold RCU while releasing parked… CVE-2026-99218 7.0

In the Linux kernel, the following vulnerability has been resolved: coredump: hold RCU while releasing parked threads coredump_finish() releases the parked threads by clearing ->task in their core_thread entry and calling wake_up_process() on each of them. It does that without holding a reference on the task and without being inside rcu. But calling wake_up_process(task) without rcu here isn't safe. A parked thread doesn't need that wakeup to leave. A spurious wakeup or a preemption after the store is enough for the task to go away. So if the coredump client is preempted between the store and wake_up_process() the thread can exit and be freed in the meantime and try_to_wake_up() takes pi_lock in freed memory. Hold rcu across the loop.

Patch this week · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: keys: Protect the type name while describ… CVE-2026-99224 7.0

In the Linux kernel, the following vulnerability has been resolved: keys: Protect the type name while describing a key keyctl_describe_key() must keep the key type's name alive until kasprintf() has consumed it. The retained key reference keeps the key and its description alive, but does not pin the module providing its type. The name is passed to kasprintf() without holding key->sem. kvasprintf() uses the saved name pointer in two formatting passes, with a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that passes View permission before type retirement can overlap a privileged module unload in this order: 1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the kasprintf() arguments and completes the first formatting pass. 2. While the formatter is delayed before its second pass, af_rxrpc_exit() calls unregister_key_type(), which removes the type from the registry and waits for key_gc_keytype(). 3. The collector takes key->sem for writing, retypes the retained key to key_type_dead and completes retirement. Unregistration and module exit return, allowing free_module() to release the type and name. 4. The formatter resumes its second pass and reads the saved name from released module storage, which can fault in string(). Hold key->sem for reading across kasprintf(). The collector then cannot retype the key or complete retirement until both formatting passes have finished. If retirement wins the lock first, formatting uses the core key_type_dead name instead. Release the semaphore immediately after kasprintf(), including on allocation failure, before copying to userspace. Oops report as below: BUG: unable to handle page fault for address: fffffbfff8054794 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:string+0x23f/0x470 Call Trace: vsnprintf+0x330/0x1110

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflecte… CVE-2026-99153 9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] <IRQ> [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0

Patch now · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task in… CVE-2026-99154 9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups.

Patch now · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: namespace: a mount that copy_tree() leave… CVE-2026-99170 8.8

In the Linux kernel, the following vulnerability has been resolved: namespace: a mount that copy_tree() leaves out can't take over a lock Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount can be moved beneath a locked mount. The lock moves from the old cover to the new mount which takes over the job of hiding what's under it and the old cover can be unmounted. That works as long as the new mount stays. But the caller picks the new mount and copy_tree() leaves a mount of a mount namespace file out of every copy made without CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make such copies. So a task that is root in its own user namespace gets rid of a locked cover on a file without a race and without touching the filesystem below it. It makes a child with a mount namespace of its own, binds the child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH, which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The new mount namespace has nothing on the file. That's the usual way to mask a single file, a bind of /dev/null or of an empty file. With a bind of an ordinary file the file stays covered. copy_tree() already refuses to leave out a locked unbindable mount with -EPERM since commit df7342b24018 ("mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a mount namespace file. That also covers a tree copied with CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS) and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from then on. The mount can't be left out and it can't be unmounted. And refuse to move a mount of a mount namespace file beneath a locked mount in the first place. Otherwise the task ends up with a mount it can't unmount and an unshare() that fails for good. Chris also found a second mount that goes away by itself, a clone of an automounted mount that shrink_submounts() took along with its parent. Commit f78ddcc87224 ("namespace: never expire a locked mount") took care of that one. Chris's reproducer is appended. Mode nsfile reads SECRET after the unshare() on 7.3-rc7, with this patch the move_mount() fails with EINVAL and the file stays covered. nsfile-control uses an ordinary file and reads MASK both ways. // SPDX-License-Identifier: GPL-2.0 /* * Get rid of a locked cover with MOVE_MOUNT_BENEATH. * * The "admin" (root) makes a tmpfs W: * W/D file, holds SECRET, covered by a bind of a file with MASK * W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory * whose "inner" holds MASK * W/own directory of uid 1000 with the file "mine" and the * directory "minedir", whose "inner" holds MINE * W/dbg debugfs, mode 755. dbg/tracing is an automount point * The "attacker" is uid 1000. It enters a new user namespace with a new mount * namespace, so W and both covers are locked there. * * usage: prog MODE * plain put a bind of own/mine beneath the cover of D, unmount the cover * nsfile put a bind of the mount namespace file of a child beneath the * cover of D, then unshare(CLONE_NEWNS) * nsfile-control the same with a bind of own/mine * shrink put a bind of the automounted tracefs beneath the cover of Dd, * unmount the cover, put a tmpfs beneath W, call umount(W), which fails * shrink-control the same with a bind of own/minedir * The environment variable AUTOMOUNT_DIR names another automount point for "shrink". */ #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <grp.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> ---truncated---

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in spl… CVE-2026-99185 8.8

In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in split transaction handling For a split transaction, either fw_core_handle_response() or split_transaction_timeout_callback() may manipulate the same transaction entry in the pending transaction list. The return value of timer_delete() is used to determine which function handles the entry. If the transaction is a split transaction and timer_delete() returns zero, the timeout callback may already be running. In this case, the response handler must leave the entry in the list for the timeout callback to remove. A previous code refactoring broke this behavior, introducing a race condition in which both functions could process the same transaction. This could lead to a use-after-free on the transaction initiator side. Fix the regression by ensuring that the response handler does not process the transaction when timer_delete() returns zero. The timeout callback is responsible for removing the entry from the pending transaction list.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Don't reset VMBus connection… CVE-2026-99216 8.4

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Don't reset VMBus connection state on error/exit paths In two places, current code forces vmbus_connection.conn_state to DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect() calls vmbus_initiate_unload(), which unloads the VMBus connection only if the conn_state is CONNECTED. Consequently, the connection remains and the Hyper-V host might continue to send messages or post VMBus interrupts. The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback"), in that vmbus_initiate_unload() started checking the current connection state before doing the unload. This commit removed some occurrences where conn_state was forced to DISCONNECTED, but these two remained, apparently due to an oversight at the time. Fix this by not forcing conn_state to DISCONNECTED during VMBus exit, or if a failure occurs when establishing the connection in the first place. Whatever value conn_state has at the time is then read by vmbus_initiate_unload() to determine if there is a connection to be unloaded.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: xfs: fix capability check in xfs An user … CVE-2026-99131 8.2

In the Linux kernel, the following vulnerability has been resolved: xfs: fix capability check in xfs An user reported a bug where he managed to evade group's quota by changing a file's gid to a different group id the same user belonged to, even though quotas were enforced on both gids and the file's size was big enough to exceed the quota's hardlimit. Commit eba0549bc7d1 replaced a capable() call by a has_capability_noaudit() to prevent unnecessary selinux audit messages. Turns out that both calls have slightly different semantics even though their documentation seems similar. Where in a nutshell: capable() - Tests the task's effective credentials has_ns_capability_noaudit() - Tests the task's real credentials This most of the time has no practical difference but in some cases like changing attrs (specifically group id in this case) through a NFS client this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively bypassing quota accounting checks. Using instead ns_capable_noaudit() should fix this issue and prevent selinux audit messages. This also fix the remaining calls to has_capability_noaudit()

Patch this week · NVD Record

Listed 28 Oct 2026 Memory corruption In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker … CVE-2026-46300 7.8 Exploited

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors.

Patch now · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer pa… CVE-2026-99107 7.8

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize().

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that d… CVE-2026-99109 7.8

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx associati… CVE-2026-99116 7.8

In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: don't truncate the po… CVE-2026-99117 7.8

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: don't truncate the port group walk on teardown __br_multicast_disable_port_ctx() and br_multicast_del_port() walk port->mglist with hlist_for_each_entry_safe(). However, br_multicast_find_del_pg() can also delete other entries from the same list through br_multicast_fwd_src_remove() or __fwd_del_star_excl(). If such an entry is the iterator's saved next node, hlist_del_init() clears its ->next and terminates the walk early. The reproducer triggers this in both teardown walks, leaving port groups in the bridge mdb with a dangling ->key.port after del_nbp() frees the port: BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320 __mdb_fill_info+0x1191/0x1320 br_mdb_dump+0x594/0xe40 rtnl_mdb_dump+0x1cf/0x5d0 Use hlist_del_init_rcu() to unlink the group while preserving ->next. br_multicast_del_pg() and the teardown walks run under br->multicast_lock. The GC worker must acquire the same lock before detaching the group for destruction, so the node remains alive while the walk uses the preserved pointer. Preserving ->next means a walk can now reach a group that an earlier iteration already deleted as a side effect. That group is off mp->ports, so br_multicast_find_del_pg() would fall through its port scan and hit the trailing WARN_ON(1). Skip such groups at the top of that helper: a port group is put on port->mglist when it is created and only unlinked when it is deleted, so hlist_unhashed() identifies exactly this case.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separat… CVE-2026-99143 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between… CVE-2026-99156 7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between st_remove() and st_open() st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put().

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Reject non-stacktrace… CVE-2026-99163 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields In check_synth_field(), when a synthetic event field is a stacktrace (field->is_stack) and the histogram field is not a "long[" stacktrace array, validation falls through to the generic size and signedness comparison. Because parse_synth_field() sets a stacktrace field's type to "__data_loc unsigned long[]", its size is sizeof(u64) and synth_field_signed() marks it as signed. Consequently, any 8-byte signed scalar histogram field passes the fallback check, and its scalar value is subsequently dereferenced as a kernel stacktrace pointer in get_field_size() and trace_stack(). Furthermore, checking strstr(hist_field->type, "long[") is insufficient because tracepoint fields defined with __bitmask() or __rel_bitmask() also have type "__data_loc unsigned long[]" or "__rel_loc unsigned long[]", whilst create_hist_field() treats them as 4-byte scalar values without HIST_FIELD_FL_STACKTRACE. Propagate HIST_FIELD_FL_STACKTRACE to variable references and field variables (whilst excluding variable aliases from per-element stacktrace capture), and reject any mismatch between HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field().

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from unders… CVE-2026-99164 7.8

In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from undersized DMA bounce buffers Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e. rounded up to the cache line size. As a result, the DMA API operates on memory beyond the end of the allocation. This was observed on a custom i.MX8MP platform with an mcp251xfd CAN controller under heavy RPMSG load, as a series of refcount_t warnings triggered from rpmsg_recv_done() in virtio_rpmsg_bus: refcount_t: addition on 0; use-after-free. refcount_t: underflow; use-after-free. refcount_t: saturated; leaking memory. Leading finally to an "Unable to handle kernel paging request" oops. Reproducing this problem took between 30 minutes and roughly 30 hours under the same workload. Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed it was overwritten from 2 to 1 by __pi_memcpy_generic() in the irq/155-spi2.0 thread. Additionally it was found that a "normal" rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In the error case the same sequence took about 215µs +/-10µs. Based on this, an LLM was used to identify the size mismatch fixed here. Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover the full mapped length, and use the same length for dma_sync_single_for_cpu() to stay consistent with map and unmap. With this patch applied, the same workload ran for more than 200 hours without the problem reproducing.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in __tcf_ac… CVE-2026-99167 7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in __tcf_action_put() __tcf_action_put() decrements the reference count before decrementing the binding count. Another thread can free the action between these operations, causing the binding-count update to access freed memory. KASAN reports it as: BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340 Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64 Hold the action IDR mutex across both counter updates and IDR removal, keeping cleanup outside the lock.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an … CVE-2026-99173 7.8

In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: <TASK> tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __kmalloc_cache_noprof+0x249/0x560 eventfs_create_dir+0x7a/0x590 event_create_dir+0x2fb/0xcf0 trace_add_event_call+0xbf/0x150 [...] Freed by task 11: kfree+0x1db/0x5b0 srcu_invoke_callbacks+0x3a3/0x620 process_one_work+0x937/0x1810 worker_thread+0x4f1/0xd60 Before commit 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") release_ei() used call_rcu(), which covered the walker, while eventfs_iterate() needs the SRCU grace period. Wait for both and chain call_rcu() from the SRCU callback.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Fix page dirtying in sev_gmem_p… CVE-2026-99177 7.8

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Fix page dirtying in sev_gmem_post_populate() set_page_dirty() requires that the caller holds some kind of lock to ensure that the page's mapping does not concurrently go away. That is not the case for a random page we got from get_user_pages_fast(), so use set_page_dirty_lock(). [sean: tag for stable]

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace perio… CVE-2026-99180 7.8

In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: pipe: preserve existing fasync readers on… CVE-2026-99203 7.8

In the Linux kernel, the following vulnerability has been resolved: pipe: preserve existing fasync readers on writer setup failure F_SETFL and FIOASYNC decide whether to invoke ->fasync() before pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can therefore both enter the callback. fasync_helper() allocates before checking for an existing entry. If the first enable installs both entries, a second enable can update the reader entry and then fail the allocation for the writer entry. The error path removes the pre-existing reader entry, clearing FASYNC while the writer entry remains registered. __fput() then skips ->fasync(), so a later pipe notification can dereference the freed file or its f_owner. An unprivileged memory-pressure reproducer triggers a KASAN slab-use-after-free in send_sigio() through this path. Keep the reader helper's result and undo the registration only if this call added it. The pipe mutex serializes changes to both lists, so a failed new registration still removes its reader, while a failed duplicate preserves the existing registrations and FASYNC. Successful duplicate enables continue to update fa_fd as before.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-establis… CVE-2026-99213 7.8

In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-established Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named b… CVE-2026-99152 7.5

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named by a management response __iscsi_complete_pdu() fetches the task for five response types from one place and checks only that the index resolved: case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_SCSI_TMFUNC_RSP: case ISCSI_OP_NOOP_IN: task = iscsi_itt_to_task(conn, hdr->itt); if (!task) return ISCSI_ERR_BAD_ITT; iscsi_itt_to_task() bounds the index against cmds_max and looks at nothing else, so a target can name any slot in the pool, including one that has never been used. task->conn is then NULL, and both iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One unsolicited NOP-In is enough; a Text Response carrying the same ITT crashes in iscsi_complete_task() instead. Require the task to be in flight and not a SCSI command, the way iscsi_itt_to_ctask() does for the command opcodes. [ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206 [ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020 [ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060 [ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 [ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800 [ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000 [ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0 [ 6.298712] PKRU: 55555554 [ 6.298713] Call Trace: [ 6.298714] <IRQ> [ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0 [ 6.298758] iscsi_complete_pdu+0x54/0xa0 [ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80 [ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.298804] __tcp_read_sock+0x1ab/0x810 [ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.298814] tcp_rcv_established+0x1f56/0x3a00 [ 6.298842] tcp_v4_do_rcv+0x449/0x960 [ 6.298847] tcp_v4_rcv+0x2245/0x3bc0

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for co… CVE-2026-99122 7.3

In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask poin… CVE-2026-99112 7.1

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask pointer after nla_next() fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates with an nla_len taken from those bytes, reading well beyond the mask attribute (KASAN: slab-out-of-bounds read in __nla_validate_parse from fl_change()). Validate the advanced mask pointer as well: when the mask is not legitimately exhausted (msk_depth != 0) and the new pointer fails nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask still skips the check, preserving exact-match behaviour for the remaining key attributes.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for … CVE-2026-99123 7.1

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets are generated internally with VMADDR_CID_LOCAL as their source, including connections using CID aliases. Use the helper after lock_sock() in the virtio receive path.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity be… CVE-2026-99142 7.1

In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity before pushing predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do… CVE-2026-99110 7.0

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX).

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: dm-crypt: fix a tiny race condition in cr… CVE-2026-99136 7.0

In the Linux kernel, the following vulnerability has been resolved: dm-crypt: fix a tiny race condition in crypt_dec_pending crypt_dec_pending reads io->error before calling atomic_dec_and_test. Another context, for example crypt_endio called from an interrupt, may set io->error and drop its reference between the read and the decrement. crypt_dec_pending then drops the last reference and completes the bio with the stale status - so a read that failed and was never decrypted, or a write that failed, is reported as successful. The read was placed before the decrement by commit b35f8caa0890 ("dm crypt: wait for endio to complete before destruction"), because that commit freed dm_crypt_io before calling bio_endio. This is no longer the case, dm_crypt_io lives in the per-bio data now. Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is fully ordered, so no additional barrier is needed.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the eviction fence until… CVE-2026-99148 7.0

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the eviction fence until the last handle is closed amdgpu_gem_object_close() detaches the user queue eviction fence from the BO before it checks bo_va->ref_count, so closing any handle of a BO removes the fence, even when the file still has another handle to the BO and the bo_va with its GPU mappings stays. The BO can then be evicted without suspending the user queues of the file, which keep accessing it through mappings that are only marked for update. Seen on navi31 with a SDMA user queue: a BO opened twice in the same file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second handle is closed (traced attach/detach of the fence): attach bo=ffff8c78a6c84c00 GEM_CLOSE handle=7 detach bo=ffff8c78a6c84c00 while handle 6 and the mapping are still in use. Only detach the fence when the last reference to the bo_va goes away, matching amdgpu_gem_object_open(), which attaches it only when the bo_va is created. With this the fence stays until the file is closed. (cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a)

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an… CVE-2026-99212 7.0

In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure rds_rdma_cm_event_handler_cmn() hands the return value of rdma_resolve_route() straight back to the rdma_cm on RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM from the route work allocation, an SA query that cannot be set up, a RoCE route with no usable device - makes addr_handler() destroy the id the event was delivered on. That id is ic->i_cm_id, and nothing clears the pointer: the connection sits in RDS_CONN_CONNECTING with a freed id until its shutdown calls rdma_disconnect() and rdma_destroy_id() on it. The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect() forces a zero return while ic->i_cm_id == cm_id, as the comment there explains. Do the same here - drop the connection and return 0 - so the id stays RDS's to destroy from the shutdown, and the reconnect gets a fresh one.

Patch this week · NVD Record

26 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Fix AMD TLBI Erratum #1718 T… CVE-2026-99099 7.8

In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Fix AMD TLBI Erratum #1718 The processor may fail to invalidate a TLB entry while executing an INVLPGB/TLBSYNC instruction pair. Detect the erratum and apply a software workaround when a microcode fix is not present.

Patch this week · NVD Record

26 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix TX descripto… CVE-2026-99094 7.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix TX descriptor bounds check btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data buffer arrays before the index is advanced modulo txq->count. An index equal to txq->count is one past the end of both arrays, so reject it in the bounds check.

Patch this week · NVD Record

23 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xa… CVE-2026-98959 9.8

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated---

Patch now · NVD Record

23 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer relea… CVE-2026-99078 9.8

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until an MPWQE is refilled. If XSK allocation then returns -ENOMEM, actual_wq_head is not advanced and a later NAPI poll retries the same WQE. mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On retry it can therefore call xsk_buff_free() again through stale pointers after the frames have returned to the XSK pool and been reallocated. Set all skip_release_bitmap bits in the common error path of mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A successful allocation already clears the bitmap after replacing every buffer, so retries become idempotent without changing the success path. Fault injection forced three consecutive failures for one selected MPWQE. Both an early allocation failure and a partial 8-of-16-buffer unwind released the original 16 XSK buffers only once. Each error left a full bitmap, the following NAPI retry skipped the release, and a later successful allocation cleared it. A 20-second AF_XDP zero-copy pressure run exercised 1,575,262 buffer allocation failures without invalid descriptors, WQE errors, or kernel warnings.

Patch now · NVD Record

Being Exploited

Linux kernel flaws CISA has added to its list of flaws attackers are using in the past six months, newest first. See all 28 on the KEV page.

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coales…

Score 7.8 / 10 · Being exploited · Fixed in 5.15.208, 6.1.174, 6.6.141, 6.12.91

CVE-2026-46300

Read: Fragnesia ›

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable…

Score 8.8 / 10 · Being exploited · Fixed in 5.5, 5.9, 5.10.259, 5.15.210

CVE-2026-53266

On HN

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_…

Score 5.5 / 10 · Being exploited · Fixed in 5.10.245, 5.15.194, 6.1.154, 6.6.108

CVE-2025-39964

On HN

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_lis…

Score 9.8 / 10 · Being exploited · Fixed in 6.1.149, 6.6.103, 6.12.44, 6.16.4

CVE-2025-39682

On HN

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path…

Score 7.8 / 10 · Being exploited · Fixed in 6.1.177, 6.6.144, 6.12.95, 6.18.38

CVE-2026-53362

On HN

Patch now

Linux kernel

An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem.

Score 7.8 / 10 · Being exploited · Fixed in 5.10.106, 5.15.29, 5.16.5

CVE-2022-0995

Rather not patch it yourself?

Bobble Solutions patches, backs up and watches Linux servers and WordPress sites.

Talk to Bobble Solutions