Linux Kernel Vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: tipc: protect node reset trace dump with node lock The tipc_node_reset_links trace event asks tipc_node_dump() to walk the node's link entries. Unlike the other node events that request link data, this event runs without the node lock. This permits bearer teardown to free a link while the trace callback is dumping it: CPU 0 CPU 1 trace_tipc_node_reset_links() tipc_node_dump() l = n->links[0].link tipc_node_write_lock() kfree(l) n->links[0].link = NULL tipc_node_write_unlock() tipc_link_dump(l) tipc_link_dump() then dereferences the stale pointer. KASAN reported: BUG: KASAN: slab-use-after-free in tipc_link_dump Read of size 4 by task poc/115 Call Trace: tipc_link_dump+0x10cb/0x16b0 tipc_node_dump+0x4bb/0x740 trace_event_raw_event_tipc_node_class+0x258/0x360 tipc_node_reset_links+0x14d/0x1a0 tipc_rcv+0x13f5/0x3030 tipc_udp_recv+0x4e3/0x670 Allocated by task 0: tipc_link_create+0x1e1/0x1020 tipc_node_check_dest+0x7d2/0x11a0 tipc_disc_rcv+0xdbf/0x1430 Freed by task 89: kfree+0x131/0x3c0 tipc_node_link_down+0x267/0x4b0 tipc_node_delete_links+0xec/0x160 bearer_disable+0x107/0x260 Take the node write lock around the trace event. This serializes the dump against tipc_node_link_down(delete=true), which frees the link under the same write lock.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix potential UAF in reqsk_timer_handler(). When TCP socket migration fails at inet_ehash_insert() in reqsk_timer_handler(), we jump to the no_ownership: label and free the new reqsk immediately with __reqsk_free(). Thus, we must stop the new reqsk's timer before jumping to the label, but the timer might be missed since the cited commit, resulting in UAF. As we are in the original reqsk's timer context, we can safely call timer_delete_sync() for the new reqsk. Let's pass false to __inet_csk_reqsk_queue_drop() to stop the new reqsk's timer.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: a mount that copy_tree() leaves out can't take over a lock Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount can be moved beneath a locked mount. The lock moves from the old cover to the new mount which takes over the job of hiding what's under it and the old cover can be unmounted. That works as long as the new mount stays. But the caller picks the new mount and copy_tree() leaves a mount of a mount namespace file out of every copy made without CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make such copies. So a task that is root in its own user namespace gets rid of a locked cover on a file without a race and without touching the filesystem below it. It makes a child with a mount namespace of its own, binds the child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH, which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The new mount namespace has nothing on the file. That's the usual way to mask a single file, a bind of /dev/null or of an empty file. With a bind of an ordinary file the file stays covered. copy_tree() already refuses to leave out a locked unbindable mount with -EPERM since commit df7342b24018 ("mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a mount namespace file. That also covers a tree copied with CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS) and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from then on. The mount can't be left out and it can't be unmounted. And refuse to move a mount of a mount namespace file beneath a locked mount in the first place. Otherwise the task ends up with a mount it can't unmount and an unshare() that fails for good. Chris also found a second mount that goes away by itself, a clone of an automounted mount that shrink_submounts() took along with its parent. Commit f78ddcc87224 ("namespace: never expire a locked mount") took care of that one. Chris's reproducer is appended. Mode nsfile reads SECRET after the unshare() on 7.3-rc7, with this patch the move_mount() fails with EINVAL and the file stays covered. nsfile-control uses an ordinary file and reads MASK both ways. // SPDX-License-Identifier: GPL-2.0 /* * Get rid of a locked cover with MOVE_MOUNT_BENEATH. * * The "admin" (root) makes a tmpfs W: * W/D file, holds SECRET, covered by a bind of a file with MASK * W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory * whose "inner" holds MASK * W/own directory of uid 1000 with the file "mine" and the * directory "minedir", whose "inner" holds MINE * W/dbg debugfs, mode 755. dbg/tracing is an automount point * The "attacker" is uid 1000. It enters a new user namespace with a new mount * namespace, so W and both covers are locked there. * * usage: prog MODE * plain put a bind of own/mine beneath the cover of D, unmount the cover * nsfile put a bind of the mount namespace file of a child beneath the * cover of D, then unshare(CLONE_NEWNS) * nsfile-control the same with a bind of own/mine * shrink put a bind of the automounted tracefs beneath the cover of Dd, * unmount the cover, put a tmpfs beneath W, call umount(W), which fails * shrink-control the same with a bind of own/minedir * The environment variable AUTOMOUNT_DIR names another automount point for "shrink". */ #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <grp.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> ---truncated---

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in split transaction handling For a split transaction, either fw_core_handle_response() or split_transaction_timeout_callback() may manipulate the same transaction entry in the pending transaction list. The return value of timer_delete() is used to determine which function handles the entry. If the transaction is a split transaction and timer_delete() returns zero, the timeout callback may already be running. In this case, the response handler must leave the entry in the list for the timeout callback to remove. A previous code refactoring broke this behavior, introducing a race condition in which both functions could process the same transaction. This could lead to a use-after-free on the transaction initiator side. Fix the regression by ensuring that the response handler does not process the transaction when timer_delete() returns zero. The timeout callback is responsible for removing the entry from the pending transaction list.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Don't reset VMBus connection state on error/exit paths In two places, current code forces vmbus_connection.conn_state to DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect() calls vmbus_initiate_unload(), which unloads the VMBus connection only if the conn_state is CONNECTED. Consequently, the connection remains and the Hyper-V host might continue to send messages or post VMBus interrupts. The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback"), in that vmbus_initiate_unload() started checking the current connection state before doing the unload. This commit removed some occurrences where conn_state was forced to DISCONNECTED, but these two remained, apparently due to an oversight at the time. Fix this by not forcing conn_state to DISCONNECTED during VMBus exit, or if a failure occurs when establishing the connection in the first place. Whatever value conn_state has at the time is then read by vmbus_initiate_unload() to determine if there is a connection to be unloaded.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: xfs: fix capability check in xfs An user reported a bug where he managed to evade group's quota by changing a file's gid to a different group id the same user belonged to, even though quotas were enforced on both gids and the file's size was big enough to exceed the quota's hardlimit. Commit eba0549bc7d1 replaced a capable() call by a has_capability_noaudit() to prevent unnecessary selinux audit messages. Turns out that both calls have slightly different semantics even though their documentation seems similar. Where in a nutshell: capable() - Tests the task's effective credentials has_ns_capability_noaudit() - Tests the task's real credentials This most of the time has no practical difference but in some cases like changing attrs (specifically group id in this case) through a NFS client this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively bypassing quota accounting checks. Using instead ns_capable_noaudit() should fix this issue and prevent selinux audit messages. This also fix the remaining calls to has_capability_noaudit()

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another session's ksmbd_chann_list and then clears conn->binding leaves that channel behind when it disconnects: the channel, whose chann->conn points at the now freed struct ksmbd_conn, stays on the owner session's list. When the owning connection later tears down, the second loop dereferences the stale channel: xa_for_each(&sess->ksmbd_chann_list, chann_id, chann) if (chann->conn != conn) ksmbd_conn_set_exiting(chann->conn); /* freed */ which is a use-after-free write into the freed ksmbd_conn (the same stale channel is also walked by show_proc_session() through /proc). The session is leaked as well, because its channel list never empties. Remove the conn->binding gate so a connection always removes its channels from every session on teardown.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namei: don't reveal overmounted entries in refwalk In rcuwalk the dentry is validated before it is accepted. step_into() step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock. An entry that gets unlinked in between causes the lookup to retry and miss. A refwalk doesn't do this. lookup_fast() takes a reference on the hashed dentry and simply accepts it. So an unlink that happens after the reference was taken isn't seen by refwalk. That's fine for a simple file. We just happened to open it before it was unlinked, no problem. For a mountpoint and specifically a locked mountpoint it very much isn't. The unlink detaches all mounts and then removes the name. Any refwalk that hasn't traversed the mounts yet simply reveals the underlying entry. It's a very narrow window but it can be hit: reads of a covered file in 60 s, 3 walkers, ~15000 unlinks no widening 27 that step + 200 us 3741 See the appended patch for a more reliable reproducer. So check the entry after step_into(). unlink(), rmdir() and rename() mark the dentry with dont_mount() before they detach the mounts and remove the dentry. So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the time its mounts were looked at is a name that was unlinked under the refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and it is set before they are detached by detach_mounts(). A refwalk that missed the mounts will see DCACHE_CANT_MOUNT. Plain d_unlinked() is fine. A rename takes the dentry off its hash chain but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename over the dentry unhash it. The only move that flips IS_ROOT splices in a disconnected alias. That doesn't have DCACHE_CANT_MOUNT set. Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately land on an unhashed directory. A refwalk that crossed onto a mount has path.mnt different from nd->path.mnt. A dentry that a filesystem dropped on its own (d_invalidate(), d_drop()) doesn't have the flag set and is treated as before. // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against walkers that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 while there is none */ static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe ---truncated---

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: unhash a dentry before detaching the mounts on it unlink(), rmdir() and rename() remove the entry from the filesystem, call detach_mounts() on the entry with the inode locked and then call d_delete() once the inode is unlocked. The thing is that between detach_mounts() and d_delete() the dentry is still hashed and positive. But after detach_mounts() nothing covers the dentry anymore. A lookup that finds this dentry in the dcache can uncover what the mounts hid. That's a problem when unlinking files or directories that are mountpoints in other mount namespaces. Everybody who had the underlying entry covered can race the detach_mount() call until d_delete() has run. The race window isn't all that small. It encompasses namespace_unlock() with a full synchronize_rcu_expedited() grace period and the inode_unlock() of the entry. In my experiments three walkers that kept trying read an overmounted file in 11938 of the 16140 unlinks that removed its mountpoint from a bind mount of the filesystem within a minute. Fun fact, d_invalidate() has the same ordering problem but gets it right. It unhashes the dentry first and detaches the mounts afterwards. Let's do the same in __detach_mounts(): - A lookup that hasn't found the dentry yet misses it in the dcache and waits for the directory lock that the caller holds until the name is gone for good. - A lockless lookup that found it already fails the mount_lock check while the dentry still counts as a mountpoint and the d_seq check once it doesn't, and retries. This fixes the lockless path. We still need to fix the reference count lookup in a follow-up patch. So d_drop() the dentry. The dentry stays positive and held but can't be found anymore. Then proceed with the detach and unlink. Reproducer: The reads were counted with the program below, three walkers for 60 s in a VM with 4 CPUs. The race window is stretched with the debug patch pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it found a mountpoint dentry and before its mounts are crossed. fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts() and d_delete(). // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against lookups that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 wh ---truncated---

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix heap out-of-bounds write in krb5_authenticate() In krb5_authenticate(), out_len is calculated to determine available headroom in response_buf for the incoming Kerberos AP-REP token. However, when SMB2_SESSION_SETUP is processed as a non-first element of a compounded SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off. This causes out_len to overstate remaining buffer headroom by the cumulative size of prior responses in the compound chain. Consequently, the length check in ksmbd_krb5_authenticate() (*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy() to write the AP-REP blob past the end of response_buf into adjacent kernel heap memory. Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len, ensuring it accurately reflects physical remaining buffer space.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: never expire a locked mount Locked mounts are special. They protect the underlying files and directories from being revealed. do_umount() refuses to unmount locked mounts but shrink_submounts() doesn't. A shrinkable mount can become locked once the owner of a user namespace puts it beneath a locked mount with MOVE_MOUNT_BENEATH. The locked property now moves to the mount at the bottom making it possible to unmount the top mount. So umount() of an unlocked ancestor now expires the bottom mount first and the covered directory is revealed: move_mount(c -> x/hidden, MOVE_MOUNT_BENEATH) = 0 the cover after the lock moved: umount2(x/hidden) = 0 the holder of the lock: umount2(x/hidden) = EINVAL the root of the copy, busy: umount2(x) = EBUSY reads x/hidden/secret: "covered-by-root" So leave a locked mount alone as it dies together with its parent. A plain umount() of an unlocked mount with a locked one below it is EBUSY from now on. It's the same for any other locked child. A lazy umount still takes the whole tree. mark_mounts_for_expiry() never sees a locked mount. lock_mnt_tree() leaves a mount on an expiry list alone and nothing else puts a locked one on such a list. Add an assert for this.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce() The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an invalid offset to hid_field_extract(), resulting in memory reads at incorrect addresses -- possibly beyond the end of the report. If a field in the HID descriptor lists more usages than its Report Count actually reserves space for, the function's inner 'j' will walk past the end of the field: for (i = 0; i < report->maxfield; i++) { for (j = 0; j < report->field[i]->maxusage; j++) { ... value = hid_field_extract(hdev, raw_data + 1, offset + j * size, size); A descriptor listing 12288 usages against Report Count 1 has the loop extract the usage at index 12287 from bit offset 98296 -- about 12 KB past a 2-byte received report. The value is stored in wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event, making this an information disclosure. Clamp the loop to field->report_count, the number of value slots the report holds. Value slots past the last declared usage are still scanned; they reuse that usage (HID 1.11, 6.2.2.8). Verified on v6.12.105 with a UHID reproducer: a 2-byte report from such a descriptor trips KASAN before the patch and not after it.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walks the extension header chain, skipping each header by the length that header itself declares. ipv6_optlen() returns up to 2048, and the skip is never checked against skb->len, so the offset stored in *offset can point past the end of the packet. openvswitch installs that offset as the transport header, and update_ipv6_checksum() then reads and writes the transport checksum field out of bounds: BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470 Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629 CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348 Call Trace: inet_proto_csum_replace16+0x445/0x470 set_ipv6_addr+0x3dd/0x460 do_execute_actions+0x6a3d/0x7c40 ovs_execute_actions+0xfd/0x480 ovs_packet_cmd_execute+0xc38/0xf20 genl_rcv_msg+0x59e/0x870 netlink_rcv_skb+0x18b/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x6bc/0xa20 The buggy address belongs to the object at ffff88810b754980 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 390 bytes inside of freed 704-byte region [ffff88810b754980, ffff88810b754c40) Other callers use that offset too, so bound it here rather than in one caller. Reject a header whose declared length does not fit in the packet. ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this adds no new failure mode.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missing iov bounds check in parse_posix_sids() In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied out_len without being validated against the actual length of the received iov (iov_len). If a server provides an inflated out_len, sidsbuf_end will point past the end of the iov. This defeats the bounds guards in posix_info_sid_size(), allowing out-of-bounds reads into adjacent kernel memory. Fix this by rejecting responses where the calculated sidsbuf_end would exceed the received iov boundaries or cause pointer wraparound.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack() When tcp_send_synack() replaces the cloned SYN skb at the head of the retransmit queue with a copy, it frees the original with tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack. tp->retransmit_skb_hint keeps pointing at the freed skbuff_fclone_cache object. The dangling hint is read in tcp_verify_retransmit_hint() and used as the root of the rbtree walk in tcp_xmit_retransmit_queue(). An unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with an attacker-supplied ICMP fragmentation-needed message, after which a simultaneous open frees the armed SYN skb: BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) Read of size 4 at addr ffff88800604d928 by task swapper/1/0 Call Trace: tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) tcp_simple_retransmit (net/ipv4/tcp_input.c:3158) tcp_v4_err (net/ipv4/tcp_ipv4.c:587) Sync the hint to the copy.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not exceed the table capacity 'size'.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a reference on the kvm_nested_guest pointer obtained from the IDR. A concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove / --refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving the iterating vCPU with a dangling pointer. The subsequent mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable, gp->shadow_lpid and gp->l1_host all touch freed memory. The free path is fully L1-controlled. Fix this by incrementing gp->refcnt inside the loop before dropping mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the reference with kvmhv_put_nested() after the per-guest work completes. This is the same get/put discipline already used at every other call site that drops mmu_lock while holding a nested-guest pointer.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switches to a channel that already has a BSS entry, cfg80211_update_assoc_bss_entry() removes that entry before rehashing the real one, since the two would otherwise collide in the BSS rbtree. The lookup for that entry also required it to match the connection's BSS type, so an entry advertising e.g. the IBSS capability bit was left in place, and the following cfg80211_rehash_bss() then ran into it: WARN_ON(!cmp) Changing the type shouldn't really happen, but can be triggered by a rogue AP/device, so drop the check and remove any entries matching the comparison.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix server use-after-free in cifs_chan_skip_or_disable() When a secondary channel is no longer supported by the server, cifs_chan_skip_or_disable() drops the channel reference with cifs_put_tcp_session() and then continues to use the server pointer by calling cifs_signal_cifsd_for_reconnect() on it and reading its primary_server pointer. cifs_put_tcp_session() can drop the last reference of the channel and tear it down, so both the channel and the primary server (whose reference is also dropped by cifs_put_tcp_session()) can be freed before they are signaled for reconnect. Signal the channel and the primary server and capture the primary server pointer before dropping the channel reference with cifs_put_tcp_session().

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: IB/isert: wait for deferred control PDU completions before releasing the connection isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work item then runs isert_completion_put() -> isert_put_cmd(), which reads isert_conn->conn and takes conn->cmd_lock. Nothing orders that work item against teardown. isert_wait_conn() queues isert_release_work, which frees isert_conn, and iscsit_close_connection() frees the iscsit_conn right after it returns, so the queued work can run against freed memory. Count the deferred control PDU completions per connection and let isert_wait_conn() wait for them before the release work is queued. ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs iscsit_logout_post_handler(), which ends up waiting for conn->conn_wait_comp, and that completion is only sent by iscsit_close_connection() after it has called iscsit_wait_conn(). Waiting for it here would deadlock. Its wait stays the existing isert_wait4logout(). The splat below is from a kernel with tracing printk()s and an msleep(200) injected into isert_do_control_comp() to widen the window: BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620 Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182 CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: isert_comp_wq isert_do_control_comp Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x3e/0x70 ? isert_put_cmd+0x53d/0x620 kasan_report+0xce/0x100 ? isert_put_cmd+0x53d/0x620 isert_put_cmd+0x53d/0x620 ? isert_completion_put+0x305/0x330 ? isert_do_control_comp+0x2ef/0x310 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 48: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x158/0x370 isert_cma_handler+0x1e3/0x2ae0 cma_cm_event_handler+0x3e/0x240 cma_ib_req_handler+0x17d9/0x4490 cm_process_work+0x41/0x330 cm_work_handler+0x5727/0xc160 process_one_work+0x633/0x1030 worker_thread+0x45b/0xd10 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 Freed by task 184: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x121/0x380 iscsit_close_connection+0x7cf/0x1e60 iscsit_take_action_for_connection_exit+0x1b6/0x360 iscsi_target_tx_thread+0x472/0x690 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374)

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely drain sessions during logoff SMB3 multichannel allows requests for one session to run on multiple connections. Wait for all channels bound to a session before freeing shared session objects. A deferred byte-range lock remains counted as a running request and only wakes when its file closes. Wake blocked locks during the drain without unpublishing or modifying their file objects. Synchronous CANCEL requests must invoke their cancellation callback to wake pending operations, while CHANGE_NOTIFY completion remains specific to the asynchronous path. Serialize session teardown with channel registration and previous-session cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and connection teardown invoke cancellation callbacks only once.

Patch this week · NVD Record