This Week
Get Alerts ›
cvehawk_ Get Alerts
Software · Linux kernel

Linux Kernel Vulnerabilities

The latest Linux kernel security flaws, which ones attackers are using to take over servers, and how to keep your kernel patched.

New flaws, 30 days
896
Critical, 8 weeks
17
On CISA's exploited list
28
Latest exploited
28 Oct 2026

Linux Kernel Security in Short

Since the kernel team became its own CVE authority in 2024, almost every kernel bug fix gets a CVE, so hundreds appear each month. Most need local access or unusual hardware. The ones that matter are on CISA's exploited list: usually flaws that let someone with a foothold, such as a hacked website, become root. Fragnesia is one.

How to Keep the Kernel Patched

  • Install kernel updates from your distribution: apt full-upgrade or dnf upgrade kernel.
  • Reboot. A new kernel does nothing until the machine restarts on it. uname -r shows what is running now.
  • If reboots are hard to schedule, live patching (Ubuntu Livepatch, kpatch, KernelCare) covers the serious flaws in between.
  • Keep to a supported kernel line. Distribution kernels get fixes for years; a hand-built one gets none.

The Past Eight Weeks

Any Score 7+ 8+ 9+

1,724 flaws, newest first · page 2 of 35.

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ftrace: Initialize modname and offset in … CVE-2026-99219 Not scored

In the Linux kernel, the following vulnerability has been resolved: ftrace: Initialize modname and offset in print_rec() print_rec() leaves 'modname' and 'offset' uninitialized and kallsyms_lookup() only sets them on success. When the lookup fails like when a module is being loaded or unloaded, 'modname' holds a garbage value, passes the 'if (modname)' check, and is dereferenced by seq_printf(). Oops: general protection fault RIP: 0010:string+0x48/0xe0 Call Trace: vsnprintf+0x1f5/0x650 seq_printf+0x8e/0xb0 print_rec+0x6c/0xc0 t_show+0x4c/0x440 seq_read_iter+0x119/0x480 This can be triggered by reading available_filter_functions while a module is being loaded or unloaded. Initialize both variables so a failed lookup skips the module name.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: asymmetric_keys: reject trust keys withou… CVE-2026-99220 Not scored

In the Linux kernel, the following vulnerability has been resolved: asymmetric_keys: reject trust keys without IDs The PKCS#8 parser deliberately leaves the asym_key_ids payload slot empty. key_or_keyring_common() unconditionally dereferences that slot when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the plain and :chain forms reach this branch, allowing an unprivileged caller to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING followed by add_key(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279) Call Trace: <TASK> __key_create_or_update (security/keys/key.c:884) key_create_or_update (security/keys/key.c:1021) __do_sys_add_key (security/keys/keyctl.c:134) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject an asymmetric restriction key without key IDs. A PKCS#8 private key cannot identify the signer of a candidate certificate and is not a valid trust anchor.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: keys/trusted_keys: return immediately aft… CVE-2026-99221 Not scored

In the Linux kernel, the following vulnerability has been resolved: keys/trusted_keys: return immediately after TPM unseal failure trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation fails. If pcrlock() succeeds, its return value overwrites the unseal error, causing key instantiation to succeed. Return immediately when unseal fails to preserve the original error.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: keys: Protect the read method check again… CVE-2026-99222 Not scored

In the Linux kernel, the following vulnerability has been resolved: keys: Protect the read method check against type removal keyctl_read_key() checks key->type->read without holding key->sem. A reference keeps the key alive, but does not pin the module containing its type. A surviving RxRPC key can therefore be read while AF_RXRPC is being unloaded: KEYCTL_READ task Module unload and key GC ---------------- ------------------------ lookup_user_key() permission / possession checks load key->type af_rxrpc_exit() unregister_key_type() GC: down_write(key->sem) GC: retype to key_type_dead GC: up_write(key->sem) unregister_key_type() returns free_module() read saved type's read member The final access can read freed module storage. The read invocation in __keyctl_read_key() is already protected by key->sem, but the earlier method check is outside that critical section. Move the method check into __keyctl_read_key(), after key_validate() and under its existing read hold on key->sem. The check and invocation then use the same protected type for length queries and every read retry. The GC cannot retype the key until the semaphore is released, and type unregistration waits for that GC pass before the module can be freed. Return -EOPNOTSUPP when validation succeeds and the type has no read method. A temporary buffer may now be allocated before this result; allocation and copying to userspace remain outside the semaphore.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: keys: make keyring indexes independent of… CVE-2026-99223 Not scored

In the Linux kernel, the following vulnerability has been resolved: keys: make keyring indexes independent of kernel addresses KEYCTL_READ returns the serial numbers in a keyring in associative-array traversal order. The first word of the index is a public, deterministic hash of the type pointer, domain pointer and description. An unprivileged user can therefore insert keys with known descriptions, predict their order for each possible KASLR slide, and recover the kernel image address. On an x86-64 build with 16 MiB alignment, 45 user keys suffice to distinguish the candidate slides. Remove the addresses from the whole index, not just its first hash word. Assign each key type and domain a nonzero 64-bit ID and hash those IDs and the description with a once-initialized SipHash key. Use the full IDs in the later index chunks as well. Truncating or hashing the IDs there would lose the guarantee that distinct type/domain/description tuples have a differing index bit. Allocate IDs lazily since private key types need not be registered. Cache them in the index key so tree walks and copies of an existing index do not need to dereference a type descriptor that may have been unregistered. Keep the 32-bit chunk layout and diff_objects() bit offsets consistent, and retain the separate root slot for keyrings used by recursive search. The key comparison, permissions and userspace data format are unchanged; only the address-dependent in-memory ordering is replaced.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: keys: Check the authorization payload in … CVE-2026-99225 Not scored

In the Linux kernel, the following vulnerability has been resolved: keys: Check the authorization payload in process keyring searches An authorization payload and its saved credentials must remain valid while search_process_keyrings_rcu() searches the requestor's keyrings. The function validates the authorization key, then separately loads payload.data[0] and unconditionally reads rka->cred. Validation does not prevent request_key_auth_revoke() from clearing the payload. A request-key helper can assume authority and fork a descendant that inherits the authorization key. If the descendant misses in its own keyrings, it falls back to the saved requestor credentials. Successful target instantiation invalidates the authorization key without clearing the payload. After the helper exits, UMH_WAIT_PROC returns to the requester, which calls complete_request_key() and revokes that key. With the descendant paused after validation, the paths can interleave as follows: 1. The descendant enters search_process_keyrings_rcu() under RCU and key_validate() succeeds. 2. The helper instantiates the target, invalidates the authorization key, and exits. 3. The requester resumes from UMH_WAIT_PROC, calls complete_request_key(), and revokes the authorization key. request_key_auth_revoke() sets its payload pointer to NULL. 4. The descendant loads NULL and dereferences rka->cred. This NULL dereference can oops the kernel. RCU delays payload disposal but does not prevent the pointer from being cleared. Load the payload with dereference_key_rcu() and require a non-NULL result before validating the authorization key and searching its saved credentials. A non-NULL payload and its credentials remain alive for the caller's RCU read-side section; a cleared payload skips the fallback search and follows the existing error selection. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:search_process_keyrings_rcu+0x32b/0x790

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: keys: Avoid the owner account dereference… CVE-2026-99226 Not scored

In the Linux kernel, the following vulnerability has been resolved: keys: Avoid the owner account dereference in named keyring lookup Named keyring lookup must keep the storage containing the owner UID alive through the namespace mapping check. find_keyring_by_name() reads keyring->user->uid under keyring_name_lock, but that lock protects the keyring's name entry and allocation, not its separate key_user. A named session-keyring join can overlap a privileged KEYCTL_CHOWN on another CPU. If the keyring holds the last reference to its old dynamic key_user and the ownership transfer succeeds, the following ordering is possible: Named join Chown find_keyring_by_name() keyctl_chown_key() read_lock(keyring_name_lock) down_write(key->sem) load old keyring->user replace key->user and key->uid up_write(key->sem) key_put(key) key_user_put(old user): free read old user->uid read_unlock(keyring_name_lock) Chown neither takes keyring_name_lock nor key_session_mutex, so it can free the old account between the pointer load and the UID read. The lookup then reads freed memory even though the keyring itself is alive. Use keyring->uid for the mapping check. key_alloc() initializes this inline owner UID and keyctl_chown_key() updates it on chown. The existing name lock keeps its containing keyring allocated throughout the check, so lookup no longer depends on the account's lifetime. This also matches the owner UID used by the permission check. KASAN report as below: BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0 Read of size 4 at addr ffff8881128ae2ec by task keycase/500

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal tha… CVE-2026-99228 Not scored

In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal that ends work When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit. Before they do, they go through the work that is left. Unbounded work is cancelled. Bounded work is run, as it is expected to end by itself. Not all of it does. An open has no file yet, so it counts as bounded, and the open of a FIFO waits for the other end. That is what the signal is for. But the workers are signalled once, and a worker that hasn't started the work by then loses the signal: io_wq_exit_workers() io_worker_handle_work() io_wq_worker_wake() set TIF_NOTIFY_SIGNAL io_assign_current_work() io_run_task_work() clear TIF_NOTIFY_SIGNAL io_wq_submit_work() fifo_open() wait_for_partner() wait_for_completion_timeout() The thread never gets out of do_exit(): IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC exit of the thread that has submitted it hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is killed. Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT set. The bit is set before the workers are signalled, and it is tested after the flag has been cleared, with clear_notify_signal() providing the barrier. So either the flag stays, or the bit is seen. Work that is started while the io-wq exits is treated like work that is being run at that time: it isn't interrupted unless it waits interruptibly.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: io_uring/wait: don't spin on a stuck over… CVE-2026-99229 Not scored

In the Linux kernel, the following vulnerability has been resolved: io_uring/wait: don't spin on a stuck overflow list As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule() returns right away, before it gets to look at signals or arms the timeout, for io_cqring_wait() to flush the overflow list. If that doesn't empty the list, and the CQ ring doesn't hold the number of events the caller wants, the loop starts over, with the same result. The task spins in the kernel, and can't be killed. The assumption is that this can't happen: if CQEs can't be flushed, the ring is full, and min_events is capped to the size of the ring. But: - With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It is stuck on the list if a single one is free, and then the ring holds less than cq_entries events. A single threaded application that asks for as many events as the ring has entries never gets out of io_uring_enter(). - Whether the ring is full is up to the CQ head, which the application can write to. While one thread waits for events on an empty ring, another one can move the head back so that the ring looks full and have a CQE overflow. The waiter can't be stopped any more, not even by SIGKILL. Only the application can make room in the CQ ring. Return to it if the list could not be flushed.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: don't leave list poison in … CVE-2026-99230 Not scored

In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: don't leave list poison in ->hash_node io_uring_cmd_del_cancelable() uses hlist_del() to take a command off ->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in ->hash_node. Requests are recycled through the request cache without being reinitialised, and not every user of ->hash_node sets it up before it is used: If a vectored futex wait is woken while futex_wait_multiple_setup() is still queueing the futexes, io_futexv_wait() doesn't add the request to ->futex_list, and leaves the completion to the task_work queued by the wake up. io_futexv_complete() ends in __io_futex_complete(), whose hlist_del_init() is fine for a request that is unhashed, which is how all other users of the node leave it. If the request was a cancelable uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through LIST_POISON2: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-...] RIP: 0010:io_futexv_complete+0x219/0x420 Call Trace: tctx_task_work_run+0x804/0x950 tctx_task_work+0x71/0xa0 task_work_run+0x118/0x200 Leave the node unhashed.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing/syscalls: Use copy_from_user for … CVE-2026-99232 Not scored

In the Linux kernel, the following vulnerability has been resolved: tracing/syscalls: Use copy_from_user for the faultable syscall buffer syscall_copy_user_array() copies the buffer argument of faultable syscalls (write, pwrite64, ...) with __copy_from_user(), which skips access_ok(). Use copy_from_user() instead so a non-user address is rejected and the entry is recorded as faulted. It could be a security concern for machines that trust perf a bit too much.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histog… CVE-2026-99234 Not scored

In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histograms when the command fails An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_g… CVE-2026-99240 Not scored

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_goal() for zero target_value Patch series "mm/damon: move zero damos quota target_value handling to the core layer". Having zero DAMOS quota target value can cause division by zero. DAMON API callers are checking the target value parameters to avoid that. It is easy to make mistakes in some of the multiple API callers. Move that to the core layer. Patch 1 adds the corner case handling into the core layer DAMON parameters validation logic. Patches 2 and 3 remove no more needed DAMON API callers side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER, respectively. This patch (of 3): If a DAMOS scheme has a damos_quota_goal of zero target_value, damos_quota_goal() could trigger division-by-zero error. Hence each DAMON API callers should do the zero target_value validation. It is easy to make mistakes. Actually such bugs in DAMON_LRU_SORT and DAMON_SAMPLE_MTIER were found and fixed [1]. It is better to handle the corner case only once in the core layer, instead of multiple places in all DAMON API callers. One straightforward option is using an alternative denominator for the corner case in the damos_quota_goal(). However, the zero target_value is meaningless. In this case, the quota goal is always evaluated as achieved or over-achieved. The quota will only keep being reduced. Simply avoid using zero target_value by adding a check in the core layer DAMOS quota goal parameters validation/commit path, damos_commit_quota_goal(). Update it to return an error in the case. Also update its caller to propagate the error.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_filema… CVE-2026-99241 Not scored

In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite() ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding mapping->invalidate_lock, so a concurrent truncate or fallocate can be in the middle of invalidating pagecache and rewriting the runlist while the write fault maps blocks and dirties the folio. This races with ntfs_attr_fallocate(), which merges clusters into the in-memory runlist, drops the runlist lock, and only afterwards zeroes the newly allocated clusters on disk; and with the punch-hole/insert/collapse paths that free clusters after truncating the cache. Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure there are no truncate/invalidate races, "usually mapping->invalidate_lock is suitable for proper serialization". xfs takes its mmaplock (= the invalidate_lock rwsem) shared in exactly this path. Take invalidate_lock shared around iomap_page_mkwrite(). The read-only fault path is already covered because filemap_fault() itself grabs invalidate_lock shared on instantiation/read paths; only page_mkwrite was bypassing it in this driver.

Keep an eye · NVD Record

2 Nov 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ntfs: fix race between fallocate and mmap… CVE-2026-99242 Not scored

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix race between fallocate and mmap reads The fallocate implementation only takes invalidate_lock for punch hole, collapse range, and insert range operations. For standard allocation modes (mode == 0, FALLOC_FL_KEEP_SIZE), the lock is not held. During ntfs_attr_fallocate(), new clusters are mapped to the runlist via ntfs_attr_map_cluster() before being zeroed by ntfs_dio_zero_range(). This creates a window where concurrent mmap page faults can read uninitialized disk data. Since mmap uses filemap_fault() which takes invalidate_lock in shared mode, it can fault in pages during this window and expose old disk contents to userspace. This is an information leak and data integrity issue. Fix by taking invalidate_lock for all fallocate operations, not just for punch/collapse/insert modes. This prevents concurrent page faults from accessing unzeroed clusters during the allocation window.

Keep an eye · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflecte… CVE-2026-99153 9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] <IRQ> [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0

Patch now · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task in… CVE-2026-99154 9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups.

Patch now · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: namespace: a mount that copy_tree() leave… CVE-2026-99170 8.8

In the Linux kernel, the following vulnerability has been resolved: namespace: a mount that copy_tree() leaves out can't take over a lock Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount can be moved beneath a locked mount. The lock moves from the old cover to the new mount which takes over the job of hiding what's under it and the old cover can be unmounted. That works as long as the new mount stays. But the caller picks the new mount and copy_tree() leaves a mount of a mount namespace file out of every copy made without CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make such copies. So a task that is root in its own user namespace gets rid of a locked cover on a file without a race and without touching the filesystem below it. It makes a child with a mount namespace of its own, binds the child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH, which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The new mount namespace has nothing on the file. That's the usual way to mask a single file, a bind of /dev/null or of an empty file. With a bind of an ordinary file the file stays covered. copy_tree() already refuses to leave out a locked unbindable mount with -EPERM since commit df7342b24018 ("mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a mount namespace file. That also covers a tree copied with CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS) and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from then on. The mount can't be left out and it can't be unmounted. And refuse to move a mount of a mount namespace file beneath a locked mount in the first place. Otherwise the task ends up with a mount it can't unmount and an unshare() that fails for good. Chris also found a second mount that goes away by itself, a clone of an automounted mount that shrink_submounts() took along with its parent. Commit f78ddcc87224 ("namespace: never expire a locked mount") took care of that one. Chris's reproducer is appended. Mode nsfile reads SECRET after the unshare() on 7.3-rc7, with this patch the move_mount() fails with EINVAL and the file stays covered. nsfile-control uses an ordinary file and reads MASK both ways. // SPDX-License-Identifier: GPL-2.0 /* * Get rid of a locked cover with MOVE_MOUNT_BENEATH. * * The "admin" (root) makes a tmpfs W: * W/D file, holds SECRET, covered by a bind of a file with MASK * W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory * whose "inner" holds MASK * W/own directory of uid 1000 with the file "mine" and the * directory "minedir", whose "inner" holds MINE * W/dbg debugfs, mode 755. dbg/tracing is an automount point * The "attacker" is uid 1000. It enters a new user namespace with a new mount * namespace, so W and both covers are locked there. * * usage: prog MODE * plain put a bind of own/mine beneath the cover of D, unmount the cover * nsfile put a bind of the mount namespace file of a child beneath the * cover of D, then unshare(CLONE_NEWNS) * nsfile-control the same with a bind of own/mine * shrink put a bind of the automounted tracefs beneath the cover of Dd, * unmount the cover, put a tmpfs beneath W, call umount(W), which fails * shrink-control the same with a bind of own/minedir * The environment variable AUTOMOUNT_DIR names another automount point for "shrink". */ #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <grp.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> ---truncated---

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in spl… CVE-2026-99185 8.8

In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in split transaction handling For a split transaction, either fw_core_handle_response() or split_transaction_timeout_callback() may manipulate the same transaction entry in the pending transaction list. The return value of timer_delete() is used to determine which function handles the entry. If the transaction is a split transaction and timer_delete() returns zero, the timeout callback may already be running. In this case, the response handler must leave the entry in the list for the timeout callback to remove. A previous code refactoring broke this behavior, introducing a race condition in which both functions could process the same transaction. This could lead to a use-after-free on the transaction initiator side. Fix the regression by ensuring that the response handler does not process the transaction when timer_delete() returns zero. The timeout callback is responsible for removing the entry from the pending transaction list.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Don't reset VMBus connection… CVE-2026-99216 8.4

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Don't reset VMBus connection state on error/exit paths In two places, current code forces vmbus_connection.conn_state to DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect() calls vmbus_initiate_unload(), which unloads the VMBus connection only if the conn_state is CONNECTED. Consequently, the connection remains and the Hyper-V host might continue to send messages or post VMBus interrupts. The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback"), in that vmbus_initiate_unload() started checking the current connection state before doing the unload. This commit removed some occurrences where conn_state was forced to DISCONNECTED, but these two remained, apparently due to an oversight at the time. Fix this by not forcing conn_state to DISCONNECTED during VMBus exit, or if a failure occurs when establishing the connection in the first place. Whatever value conn_state has at the time is then read by vmbus_initiate_unload() to determine if there is a connection to be unloaded.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: xfs: fix capability check in xfs An user … CVE-2026-99131 8.2

In the Linux kernel, the following vulnerability has been resolved: xfs: fix capability check in xfs An user reported a bug where he managed to evade group's quota by changing a file's gid to a different group id the same user belonged to, even though quotas were enforced on both gids and the file's size was big enough to exceed the quota's hardlimit. Commit eba0549bc7d1 replaced a capable() call by a has_capability_noaudit() to prevent unnecessary selinux audit messages. Turns out that both calls have slightly different semantics even though their documentation seems similar. Where in a nutshell: capable() - Tests the task's effective credentials has_ns_capability_noaudit() - Tests the task's real credentials This most of the time has no practical difference but in some cases like changing attrs (specifically group id in this case) through a NFS client this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively bypassing quota accounting checks. Using instead ns_capable_noaudit() should fix this issue and prevent selinux audit messages. This also fix the remaining calls to has_capability_noaudit()

Patch this week · NVD Record

Listed 28 Oct 2026 Memory corruption In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker … CVE-2026-46300 7.8 Exploited

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors.

Patch now · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer pa… CVE-2026-99107 7.8

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize().

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that d… CVE-2026-99109 7.8

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx associati… CVE-2026-99116 7.8

In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: don't truncate the po… CVE-2026-99117 7.8

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: don't truncate the port group walk on teardown __br_multicast_disable_port_ctx() and br_multicast_del_port() walk port->mglist with hlist_for_each_entry_safe(). However, br_multicast_find_del_pg() can also delete other entries from the same list through br_multicast_fwd_src_remove() or __fwd_del_star_excl(). If such an entry is the iterator's saved next node, hlist_del_init() clears its ->next and terminates the walk early. The reproducer triggers this in both teardown walks, leaving port groups in the bridge mdb with a dangling ->key.port after del_nbp() frees the port: BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320 __mdb_fill_info+0x1191/0x1320 br_mdb_dump+0x594/0xe40 rtnl_mdb_dump+0x1cf/0x5d0 Use hlist_del_init_rcu() to unlink the group while preserving ->next. br_multicast_del_pg() and the teardown walks run under br->multicast_lock. The GC worker must acquire the same lock before detaching the group for destruction, so the node remains alive while the walk uses the preserved pointer. Preserving ->next means a walk can now reach a group that an earlier iteration already deleted as a side effect. That group is off mp->ports, so br_multicast_find_del_pg() would fall through its port scan and hit the trailing WARN_ON(1). Skip such groups at the top of that helper: a port group is put on port->mglist when it is created and only unlinked when it is deleted, so hlist_unhashed() identifies exactly this case.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separat… CVE-2026-99143 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between… CVE-2026-99156 7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between st_remove() and st_open() st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put().

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Reject non-stacktrace… CVE-2026-99163 7.8

In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields In check_synth_field(), when a synthetic event field is a stacktrace (field->is_stack) and the histogram field is not a "long[" stacktrace array, validation falls through to the generic size and signedness comparison. Because parse_synth_field() sets a stacktrace field's type to "__data_loc unsigned long[]", its size is sizeof(u64) and synth_field_signed() marks it as signed. Consequently, any 8-byte signed scalar histogram field passes the fallback check, and its scalar value is subsequently dereferenced as a kernel stacktrace pointer in get_field_size() and trace_stack(). Furthermore, checking strstr(hist_field->type, "long[") is insufficient because tracepoint fields defined with __bitmask() or __rel_bitmask() also have type "__data_loc unsigned long[]" or "__rel_loc unsigned long[]", whilst create_hist_field() treats them as 4-byte scalar values without HIST_FIELD_FL_STACKTRACE. Propagate HIST_FIELD_FL_STACKTRACE to variable references and field variables (whilst excluding variable aliases from per-element stacktrace capture), and reject any mismatch between HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field().

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from unders… CVE-2026-99164 7.8

In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from undersized DMA bounce buffers Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e. rounded up to the cache line size. As a result, the DMA API operates on memory beyond the end of the allocation. This was observed on a custom i.MX8MP platform with an mcp251xfd CAN controller under heavy RPMSG load, as a series of refcount_t warnings triggered from rpmsg_recv_done() in virtio_rpmsg_bus: refcount_t: addition on 0; use-after-free. refcount_t: underflow; use-after-free. refcount_t: saturated; leaking memory. Leading finally to an "Unable to handle kernel paging request" oops. Reproducing this problem took between 30 minutes and roughly 30 hours under the same workload. Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed it was overwritten from 2 to 1 by __pi_memcpy_generic() in the irq/155-spi2.0 thread. Additionally it was found that a "normal" rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In the error case the same sequence took about 215µs +/-10µs. Based on this, an LLM was used to identify the size mismatch fixed here. Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover the full mapped length, and use the same length for dma_sync_single_for_cpu() to stay consistent with map and unmap. With this patch applied, the same workload ran for more than 200 hours without the problem reproducing.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in __tcf_ac… CVE-2026-99167 7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in __tcf_action_put() __tcf_action_put() decrements the reference count before decrementing the binding count. Another thread can free the action between these operations, causing the binding-count update to access freed memory. KASAN reports it as: BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340 Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64 Hold the action IDR mutex across both counter updates and IDR removal, keeping cleanup outside the lock.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an … CVE-2026-99173 7.8

In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: <TASK> tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __kmalloc_cache_noprof+0x249/0x560 eventfs_create_dir+0x7a/0x590 event_create_dir+0x2fb/0xcf0 trace_add_event_call+0xbf/0x150 [...] Freed by task 11: kfree+0x1db/0x5b0 srcu_invoke_callbacks+0x3a3/0x620 process_one_work+0x937/0x1810 worker_thread+0x4f1/0xd60 Before commit 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") release_ei() used call_rcu(), which covered the walker, while eventfs_iterate() needs the SRCU grace period. Wait for both and chain call_rcu() from the SRCU callback.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Fix page dirtying in sev_gmem_p… CVE-2026-99177 7.8

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Fix page dirtying in sev_gmem_post_populate() set_page_dirty() requires that the caller holds some kind of lock to ensure that the page's mapping does not concurrently go away. That is not the case for a random page we got from get_user_pages_fast(), so use set_page_dirty_lock(). [sean: tag for stable]

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace perio… CVE-2026-99180 7.8

In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: pipe: preserve existing fasync readers on… CVE-2026-99203 7.8

In the Linux kernel, the following vulnerability has been resolved: pipe: preserve existing fasync readers on writer setup failure F_SETFL and FIOASYNC decide whether to invoke ->fasync() before pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can therefore both enter the callback. fasync_helper() allocates before checking for an existing entry. If the first enable installs both entries, a second enable can update the reader entry and then fail the allocation for the writer entry. The error path removes the pre-existing reader entry, clearing FASYNC while the writer entry remains registered. __fput() then skips ->fasync(), so a later pipe notification can dereference the freed file or its f_owner. An unprivileged memory-pressure reproducer triggers a KASAN slab-use-after-free in send_sigio() through this path. Keep the reader helper's result and undo the registration only if this call added it. The pipe mutex serializes changes to both lists, so a failed new registration still removes its reader, while a failed duplicate preserves the existing registrations and FASYNC. Successful duplicate enables continue to update fa_fd as before.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-establis… CVE-2026-99213 7.8

In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-established Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named b… CVE-2026-99152 7.5

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named by a management response __iscsi_complete_pdu() fetches the task for five response types from one place and checks only that the index resolved: case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_SCSI_TMFUNC_RSP: case ISCSI_OP_NOOP_IN: task = iscsi_itt_to_task(conn, hdr->itt); if (!task) return ISCSI_ERR_BAD_ITT; iscsi_itt_to_task() bounds the index against cmds_max and looks at nothing else, so a target can name any slot in the pool, including one that has never been used. task->conn is then NULL, and both iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One unsolicited NOP-In is enough; a Text Response carrying the same ITT crashes in iscsi_complete_task() instead. Require the task to be in flight and not a SCSI command, the way iscsi_itt_to_ctask() does for the command opcodes. [ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206 [ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020 [ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060 [ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 [ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800 [ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000 [ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0 [ 6.298712] PKRU: 55555554 [ 6.298713] Call Trace: [ 6.298714] <IRQ> [ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0 [ 6.298758] iscsi_complete_pdu+0x54/0xa0 [ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80 [ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.298804] __tcp_read_sock+0x1ab/0x810 [ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.298814] tcp_rcv_established+0x1f56/0x3a00 [ 6.298842] tcp_v4_do_rcv+0x449/0x960 [ 6.298847] tcp_v4_rcv+0x2245/0x3bc0

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for co… CVE-2026-99122 7.3

In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask poin… CVE-2026-99112 7.1

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask pointer after nla_next() fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates with an nla_len taken from those bytes, reading well beyond the mask attribute (KASAN: slab-out-of-bounds read in __nla_validate_parse from fl_change()). Validate the advanced mask pointer as well: when the mask is not legitimately exhausted (msk_depth != 0) and the new pointer fails nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask still skips the check, preserving exact-match behaviour for the remaining key attributes.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for … CVE-2026-99123 7.1

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets are generated internally with VMADDR_CID_LOCAL as their source, including connections using CID aliases. Use the helper after lock_sock() in the virtio receive path.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity be… CVE-2026-99142 7.1

In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity before pushing predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do… CVE-2026-99110 7.0

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX).

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: dm-crypt: fix a tiny race condition in cr… CVE-2026-99136 7.0

In the Linux kernel, the following vulnerability has been resolved: dm-crypt: fix a tiny race condition in crypt_dec_pending crypt_dec_pending reads io->error before calling atomic_dec_and_test. Another context, for example crypt_endio called from an interrupt, may set io->error and drop its reference between the read and the decrement. crypt_dec_pending then drops the last reference and completes the bio with the stale status - so a read that failed and was never decrypted, or a write that failed, is reported as successful. The read was placed before the decrement by commit b35f8caa0890 ("dm crypt: wait for endio to complete before destruction"), because that commit freed dm_crypt_io before calling bio_endio. This is no longer the case, dm_crypt_io lives in the per-bio data now. Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is fully ordered, so no additional barrier is needed.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the eviction fence until… CVE-2026-99148 7.0

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the eviction fence until the last handle is closed amdgpu_gem_object_close() detaches the user queue eviction fence from the BO before it checks bo_va->ref_count, so closing any handle of a BO removes the fence, even when the file still has another handle to the BO and the bo_va with its GPU mappings stays. The BO can then be evicted without suspending the user queues of the file, which keep accessing it through mappings that are only marked for update. Seen on navi31 with a SDMA user queue: a BO opened twice in the same file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second handle is closed (traced attach/detach of the fence): attach bo=ffff8c78a6c84c00 GEM_CLOSE handle=7 detach bo=ffff8c78a6c84c00 while handle 6 and the mapping are still in use. Only detach the fence when the last reference to the bo_va goes away, matching amdgpu_gem_object_open(), which attaches it only when the bo_va is created. With this the fence stays until the file is closed. (cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a)

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an… CVE-2026-99212 7.0

In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure rds_rdma_cm_event_handler_cmn() hands the return value of rdma_resolve_route() straight back to the rdma_cm on RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM from the route work allocation, an SA query that cannot be set up, a RoCE route with no usable device - makes addr_handler() destroy the id the event was delivered on. That id is ic->i_cm_id, and nothing clears the pointer: the connection sits in RDS_CONN_CONNECTING with a freed id until its shutdown calls rdma_disconnect() and rdma_destroy_id() on it. The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect() forces a zero return while ic->i_cm_id == cm_id, as the comment there explains. Do the same here - drop the connection and return 0 - so the id stays RDS's to destroy from the shutdown, and the reconnect gets a fresh one.

Patch this week · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengt… CVE-2026-99100 Not scored

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengths The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state.

Keep an eye · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ntfs: move attribute payload before shrin… CVE-2026-99101 Not scored

In the Linux kernel, the following vulnerability has been resolved: ntfs: move attribute payload before shrinking its record ntfs_new_attr_flags() resizes the non-resident attribute record before moving its name and mapping pairs to their shorter-header offsets when compression or sparse state is cleared. Shrinking the record first moves the following attribute over the tail of the old record. The subsequent memmove() therefore copies bytes from that following attribute instead of the old mapping pairs. Re-enabling compression on an empty file persists those bytes as a malformed mapping pairs array, which ntfsck reports as a missing or invalid run length. Move the payload before shrinking the record, while retaining the existing resize-before-move ordering when growing it.

Keep an eye · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_setatt… CVE-2026-99102 Not scored

In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_setattr_size() ntfs_setattr_size() updates i_size and resizes the on-disk attribute without holding mapping->invalidate_lock. Page faults take the lock shared, so a fault racing the resize can resolve a VCN against the transient runlist state of ntfs_non_resident_attr_expand() and fail with a spurious SIGBUS, and can interleave with the size-change epilogue (truncate_pagecache(), i_size_write(), pagecache_isize_extended()). Take invalidate_lock exclusively around the whole resize after inode_dio_wait(), matching the fallocate path and other filesystems such as xfs, which wraps truncate in its mmaplock (= invalidate_lock).

Keep an eye · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix unbound pool lifetime for … CVE-2026-99103 Not scored

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix unbound pool lifetime for pending pwqs KASAN reports a use-after-free of an unbound worker_pool in node_activate_pending_pwq(): BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120 Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318 CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: 0x0 (flush-8:0) Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x610 kasan_report+0xce/0x100 _raw_spin_trylock+0x6d/0x120 pwq_dec_nr_in_flight+0x4b4/0xcb0 process_one_work+0x921/0x11a0 worker_thread+0x4d0/0xd20 kthread+0x2de/0x3c0 ret_from_fork+0x3aa/0x620 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 311: alloc_pwq+0x439/0xca0 apply_wqattrs_prepare+0x75e/0xd10 apply_workqueue_attrs_locked+0x44/0xa0 wq_nice_store+0x350/0x450 Freed by task 0: kfree+0x127/0x3b0 rcu_core+0x523/0x1780 handle_softirqs+0x1b3/0x610 Last potentially related work creation: put_unbound_pool+0x3f3/0x7d0 pwq_release_workfn+0x494/0x8e0 kthread_worker_fn+0x1ff/0x790 Canceling the last inactive work skips pwq_dec_nr_active(), so an empty pwq can remain on pending_pwqs when its refcnt reaches zero. pwq_release_workfn() currently puts the pool before removing that pwq. If this drops the last pool reference, the pool can be RCU-freed while the pwq remains reachable, and node_activate_pending_pwq() may trylock the freed pool->lock. Remove the pwq from pending_pwqs before putting the pool.

Keep an eye · NVD Record

28 Oct 2026 Security flaw In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix the bypass dispatch claim … CVE-2026-99104 Not scored

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor scx_bypass() claims bypass dispatch when the scheduler's depth goes from zero to one and releases it when the depth returns to zero, but propagates only the depth to the descendants, not the claim. A descendant that starts bypassing with its ancestor never claims, and one whose own bypass ends under the ancestor's keeps its claim, as its depth does not return to zero. A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that starts under a PM suspend has no claim, so once the resume lifts the root's bypass its tasks sit on the parent's bypass DSQs with nobody consuming them. Claim for every descendant whose depth goes from zero to one in the propagation and release every scheduler in the subtree whose depth returned to zero once the tasks have moved out of the bypass DSQs. A parent that is bypassing itself when a descendant claims consumes only its own bypass DSQs, empty until it leaves bypass and becomes the host.

Keep an eye · NVD Record

Being Exploited

Linux kernel flaws CISA has added to its list of flaws attackers are using in the past six months, newest first. See all 28 on the KEV page.

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coales…

Score 7.8 / 10 · Being exploited · Fixed in 5.15.208, 6.1.174, 6.6.141, 6.12.91

CVE-2026-46300

Read: Fragnesia ›

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable…

Score 8.8 / 10 · Being exploited · Fixed in 5.5, 5.9, 5.10.259, 5.15.210

CVE-2026-53266

On HN

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_…

Score 5.5 / 10 · Being exploited · Fixed in 5.10.245, 5.15.194, 6.1.154, 6.6.108

CVE-2025-39964

On HN

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_lis…

Score 9.8 / 10 · Being exploited · Fixed in 6.1.149, 6.6.103, 6.12.44, 6.16.4

CVE-2025-39682

On HN

Patch now

Linux kernel

In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path…

Score 7.8 / 10 · Being exploited · Fixed in 6.1.177, 6.6.144, 6.12.95, 6.18.38

CVE-2026-53362

On HN

Patch now

Linux kernel

An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem.

Score 7.8 / 10 · Being exploited · Fixed in 5.10.106, 5.15.29, 5.16.5

CVE-2022-0995

Rather not patch it yourself?

Bobble Solutions patches, backs up and watches Linux servers and WordPress sites.

Talk to Bobble Solutions