Linux Kernel Vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity prepare_tile_info_buffer() writes one entry per tile into the tile_sizes DMA buffer, sized for a grid equal to the PPS uAPI array capacity. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows() helpers so the loops stay inside the buffer.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix use-after-free in alarm work fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing cancels it. fan_alarm_notify() dereferences fan_data and its hwmon device. On unbind, devres frees the interrupt, which only waits for the handler itself, and then releases the hwmon device and fan_data, so a pending fan_alarm_notify() can run after those frees. Replace INIT_WORK() with devm_work_autocancel(), registered before devm_request_irq(). The devres cleanup then frees the interrupt first, so no new work can be queued, and cancels the work while fan_data and the hwmon device are still alive. This issue was found by an in-house static analysis tool.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: afs: Fix double-unmap of directory block Fix afs_edit_dir_remove() to use a cleanup function to unmap the block pointed to by afs_dir_iter::block if it's left pointing to something rather than manually kunmapping the blocks. Manually kunmapping without clearing iter.blocks can result in a double-kunmap if afs_dir_find_block() is called twice in a row (which would be the case if the block being modified is not first in the hash chain).

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: afs: Fix missing kunmap in afs_dir_search_bucket() Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:" path.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [[email protected]: updated to apply; fixed checkpatch.pl issues]

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly When hardware persistently returns -EBUSY after exhausting retries, the error propagates to crypto_finalize_*_request(). The crypto API's completion wrapper treats -EBUSY as a queueing status and swallows it, preventing the completion callback from firing. This causes callers using crypto_wait_req() to block indefinitely. Translate persistent -EBUSY to -EIO after retry exhaustion to ensure proper error propagation and callback invocation.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with PAES algorithm In function ctr_paes_do_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. Rework the code to explicitly scrub the buffer at the end of the function to avoid exposure of maybe sensitive data. In function __xts_2keys_prep_param() change the existing scrub to clean the whole param block instead of just the key field.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix handling of EBUSY in PHMAC when req is pushed to crypto engine When a request is transferred to the engine via crypto_transfer_hash_request_to_engine() there are two return codes signaling a successful transfer: EINPROGRESS and EBUSY. However the correct handling of EBUSY was missing and has been added as a return code indicating a successful transfer to the crypto engine.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm In function ctr_aes_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. When the buffer is used explicitly scrub it at the end of the code block to avoid exposure of maybe sensitive data. In a similar way the function gcm_aes_crypt() hat an error path where the CPACF param block was not scrubbed. Instead of return early now these error paths go to end of function where explicit scrubbing is done. Similar with the buffers which are part of the gcm_sg_walk structs from the variables gw_in and gw_out.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Fix NULL dereference in iova_to_phys() with ZPCI_TABLE_TYPE_RFX When using a 5-level translation table via ZPCI_TABLE_TYPE_RFX get_rso_from_iova() returns NULL when the region-first entry is invalid. Yet in get_rto_from_iova() the region-second origin rso is not checked to be non-NULL before accessing rso[rsx] leading to a NULL pointer dereference instead of a NULL return when iova_to_phys() is called on a unmapped IOVA. Fix this by adding the missing NULL check.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ipvs: reject invalid states in connection template sync records IPVS sync receivers validate protocol states before creating or updating a connection. For connection templates, however, they only log states outside the template state range and still store the value in the connection. A template can be returned by ordinary connection lookup. TCP and SCTP then use the invalid state as an index into their transition tables. Reject invalid template states in both sync protocol versions before looking up or modifying a connection. The version 1 path handles both IPv4 and IPv6 records.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every successful GET. The recheck path for a compatible existing flowlabel links another lease without applying any lease admission check. Repeated GET requests for one shareable label can therefore grow a socket's lease list without bound. Reject a new unprivileged lease once the socket already holds FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse of a globally interned label, including the fl_intern() collision path, is covered as well. New-label admission remains under the existing mem_check() policy. Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching mem_check(). An unprivileged user must not bypass the cap by creating a user namespace and a netns where they have CAP_NET_ADMIN, which would still consume host memory. Check the capability only when the socket reaches the limit, so successful unprivileged GET requests below the cap do not generate a capability audit. Do the admission check before updating linger and expires so a rejected GET does not refresh the shared label, matching the existing socket-list allocation failure path.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: bound automatic table ID allocation fib_empty_table() probes every table ID from 1 until it finds a free one. IPv4 tables are stored in a 256-bucket hash table, so a dense set of IDs makes each probe walk a growing hash chain while RTNL is held. Automatic table assignment ("ip rule ... table 0") is an IPv4-only legacy path. Bound the automatically allocated ID to 4096 so the RTNL hold stays bounded, without changing lookups of explicitly specified table IDs. This changes user-visible behavior. A table-0 rule previously received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After this patch the search stops at 4096 and the rule add fails with ENOBUFS if that range is fully occupied. Explicit table IDs above 4096 remain usable. The automatic path is unused in practice: it is IPv4-only, not documented by ip-rule, uncovered by kernel selftests, and both NetworkManager and systemd refuse table 0.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ieee802154: hwsim: serialize pib updates to fix double-free hwsim_update_pib() does an unserialized read-swap-free of phy->pib: pib_old = rtnl_dereference(phy->pib); ... rcu_assign_pointer(phy->pib, pib); kfree_rcu(pib_old, rcu); It assumes the RTNL is held, but ->set_channel is not always called under it: the mac802154 scan worker changes channels via drv_set_channel() without the RTNL. Such an update can race an RTNL-held one on the same phy; both read the same pib_old and both kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves batching kfree_rcu(), this surfaces as a KASAN invalid-free in rcu_free_sheaf(). struct hwsim_phy has no lock for pib. Add one and make the swap atomic with rcu_replace_pointer() under it, dropping the misleading rtnl_dereference().

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ieee802154: cc2520: fix FIFOP work use-after-free The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal, cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ remains active until after ->remove() returns and can queue the work again after that flush, allowing it to run after the private data is released. Disable the work with disable_work_sync() instead of flushing it, so the handler can no longer queue it once removal begins. Destroy the buffer mutex last, since the worker and the stop callback invoked through ieee802154_unregister_hw() both take it. Found by an in-house static analysis tool.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink TUNSETLINK allows a TUN device to change its link-layer type to ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink() checks only the device type before dereferencing the pointer, so an RTM_NEWLINK request can trigger a NULL pointer dereference. Reject devices without ieee802154_ptr along with devices of the wrong type.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: idpf: disable DIM work before freeing q_vectors idpf never drains the Tx/Rx DIM works before freeing the memory they live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them. idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory: idpf_vport_intr_write_itr() writes the ITR register through q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of the freed q_vector. No configuration is needed to get there -- IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc() initialises both modes to IDPF_ITR_DYNAMIC. Draining after idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim() is called from inside the "if (napi_complete_done(napi, work_done))" branch of the poll, and napi_complete_done() has already cleared NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still queueing the work, and a plain cancel_work_sync() would be re-armed behind the drain. Use disable_work_sync(): schedule_work() on a work with a non-zero disable count is dropped by clear_pending_if_disabled() before __queue_work() is reached. Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are initialised on every path that can reach the drain -- the three "goto intr_deinit" sites between idpf_vport_intr_init() and idpf_vport_intr_ena() get there without the enable side having run. Nothing re-enables them: rsrc->q_vectors is freed on every exit from idpf_vport_open() and on every idpf_vport_stop(), so the count dies with the object. It is a race, not a deterministic failure -- net_dim() only schedules once DIM_NEVENTS events have accumulated and the profile index changes. A KASAN ifup/ifdown loop under load is the way to see it.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: fbdev: vfb: defer cleanup until the last reference FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the usercopy after dropping info->lock. vfb_remove() frees the colormap immediately after unregistering the framebuffer, even when an open file still holds a reference to fb_info. A concurrent driver unbind can therefore free the colormap while the ioctl copies it to userspace. KASAN reports: BUG: KASAN: slab-use-after-free in _copy_to_user Read of size 512 by task poc/125 _copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24) fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211) do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114) Allocated by task 1: fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108) vfb_probe (drivers/video/fbdev/vfb.c:459) Freed by task 124: fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151) vfb_remove (drivers/video/fbdev/vfb.c:489) unregister_framebuffer() drops the registration reference, and fbdev calls fb_destroy after the last put_fb_info(). Move the registered framebuffer's cleanup into an fb_destroy callback so its colormap and screen buffer stay alive until all file references have been released.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: erofs: preserve LZMA decoders on resize failure The pool-resize path frees each stream's old decoder before allocating its replacement. If an allocation fails after some streams have already been replaced, the failed stream is put back on the list with state == NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole pool had been resized. An existing LZMA mount can select the broken stream and pass NULL to xz_dec_microlzma_reset(). A retry at the same size also skip another resize attempt. Since the global maximum was advanced, thus, the invalid state is left unrepaired. Allocate each replacement before freeing the old decoder, temporarily retaining one old decoder during allocation. Stop at the first failure and advance z_erofs_lzma_max_dictsize only after all streams satisfy the request. Record each stream's dictionary capacity so retries can skip streams already enlarged before a partial failure.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: fs: autofs: fix memory leak in autofs_fill_super() In autofs_fill_super(), we create a new inode using autofs_new_ino(), however, if we fail to create root_inode, (that is, root_inode failure path), we return -ENOMEM without freeing the new inode(ino) that we created causing a memory leak. Fix this by adding autofs_free_ino() to free the inode we created in root_inode failure path before returning ENOMEM.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Put device on unsupported feature error Route unsupported provisioned features through the common error path after vdpa_alloc_device() so the allocated device and adapter pointer are released consistently.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix uninitialized return value in netfs_unbuffered_write() If preparation of the first subrequest fails, netfs_unbuffered_write() exits its loop before ret is initialized. The empty-iterator check can do the same. For synchronous writes, netfs_unbuffered_write_iter_locked() may then return an unrelated error instead of wreq->error. This is reachable through CIFS if cifs_prepare_write() fails to reopen the file or obtain credits. Initialize ret to 0 so the caller returns wreq->error if no data was written, or the number of bytes already written otherwise. Found with Clang's -Wconditional-uninitialized.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: mana: Reserve extra CQ slot for the fence completion CQE The RX completion queue is sized to hold exactly one CQE per posted RX WQE. MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after the packet CQEs. The current sizing reserves no extra slot for it and in rare cases, CQ has no guaranteed slot for the fence CQE when it is full of packet CQEs. This can lead to dropping the fence completion while the driver waits holding RTNL lock throughout the timeout duration. Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory() requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE; the reservation pushes cq_size past a power-of-two, so round up the CQ size in mana_create_rxq().

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_brcm: legacy FCS: request needed tailroom The legacy FCS tagger calculates the CRC over skb->len bytes starting at skb->data. When a nonlinear skb reaches the tagger, this reads past the linear head into unrelated slab memory. The tagger appends an Ethernet FCS but does not declare that tailroom. As a result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user port, and nonlinear skbs can reach the CRC calculation. Declare the required tailroom. DSA will then clear those features and the networking core will linearize skbs before the tagger runs. A KASAN-enabled dsa_loop test using this tagger reports: BUG: KASAN: slab-out-of-bounds in crc32_le Read of size 1 at addr ffff8880397086c0 by task exp/135 Call Trace: crc32_le (lib/crc/crc32-main.c:38) brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343) dsa_user_xmit (net/dsa/user.c:942) dev_hard_start_xmit (net/core/dev.c:3937) __dev_queue_xmit (net/core/dev.c:4926) packet_sendmsg (net/packet/af_packet.c:3110) __sys_sendto (net/socket.c:2281) The buggy address belongs to the object at ffff888039708400 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ffff888039708400, ffff8880397086c0)

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: bridge: use option bits for CFM/MRP frame handlers CFM and MRP register a global br_frame_type whose hlist_node is linked into the per-bridge frame_type_list when the first MEP/MRP instance is created. Enabling the protocol on multiple bridges therefore inserts the same node into multiple lists. Unregistering it on one bridge then corrupts list state belonging to another. These handlers can only be installed once per bridge, and they are uncommon. Track their per-bridge enable state with net_bridge option bits, which already live on the Rx hot cache line, and dispatch the matching handler directly from the receive path. Check both bits together first as an unlikely case. Remove the generic frame_type_list and br_frame_type helpers, which have had no other users since CFM and MRP were added. That shrinks struct net_bridge by 8 bytes and drops the list walk from the fast path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and the compiler prunes the branch.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: release all action references on NEWACTION failure When a batched RTM_NEWACTION request replaces an existing action, tcf_idr_check_alloc() takes a temporary reference on it. If a later action fails to initialize, tcf_action_destroy() uses strict release semantics to clean up the actions initialized so far. For an action bound to a filter, the strict check returns -EPERM without dropping the temporary reference. This error also makes tcf_action_destroy() return before releasing subsequent entries. Any new action initialized between the bound action and the failing entry is leaked together with its reserved IDR slot, preventing reuse of its index. Use tcf_idr_release() to drop each reference held by the batch without rejecting bound actions. This allows cleanup to continue through all initialized entries and preserves the module reference release when an action is destroyed. Explicit action deletion and flushing retain their separate bind-count checks.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check resize_disabled before publishing the new subbuf order ring_buffer_subbuf_order_set() stores the new order and only then walks the CPUs, returning -EBUSY if any of them has resizing disabled. A user mapped buffer has resizing disabled, and __rb_map_vma() reads buffer->subbuf_order without buffer->mutex, so an mmap of an already mapped CPU racing the failing order change sizes the mapping with the new order and inserts pages past the sub-buffer into the VMA. Check the CPUs before storing the new order.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: end write accounting from ->ki_complete Commit b000145e9907 moved both the fsnotify calls and the write accounting out of the kiocb completion handler and into the io_req_rw_complete() task_work. However, only the fsnotify part actually needed to move as it may sleep. Ending the write accounting is just a percpu_up_read() on the superblock writers sem. Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE protection depend on the ring owner getting to running task_work. But the task may be blocked in freeze_super(), causing it to never get to that: task io-wq worker -------------------------------------------------------------- io_write() io_kiocb_start_write() (takes sb_writers, hidden from lockdep by __sb_writers_release) write_iter() -> -EIOCBQUEUED ioctl(FS_IOC_SHUTDOWN) bdev_freeze() freeze_super() percpu_down_write() <- waits for the reader above io_write() kiocb_start_write() percpu_down_read() <- queued behind the writer <bio completes> io_complete_rw() queues io_req_rw_complete() <- never runs, task is in D state End the write from io_complete_rw() instead, and leave only the fsnotify calls in task_work.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to flush the L2/HDC data cache before fence signalling, but it never requests a flush of the LSC untyped L1 data cache via the 'Untyped Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11]. Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to also flush/invalidate the untyped L1 cache, but only depending on how HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling between HDC Pipeline Flush and the untyped L1 cache flush no longer holds in practice, regardless of how HDC_CHICKEN0 is programmed, so relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan driver (anv) has been assuming the kernel flushes both caches between submissions, and hit user-visible corruption in apps such as Llama.cpp because of this gap; it now works around it by flushing both caches again from userspace at the end of every command buffer. Correctness between submissions on the same queue is userspace's responsibility and belongs in Mesa, not the kernel. However, for security we must ensure stale data can't leak through the untyped L1 dataport cache once memory is reclaimed or evicted, which requires the KMD to flush it before releasing memory for reuse. Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline Flush coupled to the untyped L1 cache flush, so those platforms are unaffected. Mesa's own anv driver found that on MTL the HW disconnected the two independently of how HDC_CHICKEN0 is programmed, and could not bring the old behavior back even by writing the register by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped cache flush in 3D mode"). The kernel can't reliably request the flush from the CS on MTL either, so restrict the new PIPE_CONTROL bit to GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on. Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on Xe2 and later, so the L1 data cache is known clean before memory is released for reuse, without depending on undocumented platform-specific HDC_CHICKEN0 behavior. Bspec: 56551 (cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6)

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: fix unchecked bound endpoint name length rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree path into a 32-byte stack buffer. Device tree paths are not limited to this size, so a sufficiently long path can overflow the buffer. Use snprintf() with the destination size to truncate the generated name and keep the writes within bounds.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix memory leak in query_perf_config_list() When krealloc() fails, free the original oa_config_ids before returning to avoid a memory leak. (cherry picked from commit 9977e9d84f46d4f12ad35fbbc0ec4638554bce87)

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/drm_exec: fix up contended obj when num_objects is 0 drm_exec_prepare_array() silently returns success without calling drm_exec_lock_contended() when num_objects is zero. This breaks the invariant upheld by drm_exec_lock_obj(), where every entry point into the locking sequence must first attempt to lock any previously contended object before proceeding. Drivers that chain multiple drm_exec_prepare_array() calls per drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait ioctls, which prepare separate read and write BO arrays) can pass an empty array for one of the two calls. If contention is hit while preparing the non-empty array, exec->contended is set and the loop retries; on retry, the empty-array call preceding it is a no-op that never clears exec->contended, so drm_exec_retry_on_contention() immediately jumps back to the top of the loop without ever reaching the call that would resolve the contention. This spins forever. Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended() directly when num_objects is zero, so a pending contended object dont loop infinitely.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: genetlink: pin family module during policy dump The generic netlink controller's policy dump keeps pointers to the target family's operation and policy tables in its callback state. A dump may be split across multiple skbs and remain pending after the initial request. Netlink pins the module which owns the dump callback, but in this case that is the controller's owner rather than the target family's owner. The target family can consequently be unregistered and its module unloaded while a policy dump is pending. Advancing the dump then dereferences policy memory from the unloaded module. Take a reference to the target family's module when the dump starts. Drop it from the error and done paths. This matches the lifetime for which the dump context retains the family and policy pointers.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: fs: don't return -EINVAL for successful nested thaw Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices") replaced the freeze_holders bitmask with per-holder counters to allow nested freezes. In the bitmask version, a thaw that released a shared hold while another holder remained returned 0. Since the rework, thaw_super_locked() drops the freeze reference via freeze_dec() but then returns -EINVAL when other freezers remain, misinforming the caller: the thaw did succeed, the superblock just stays frozen for the remaining holders. This breaks bdev-initiated freezing. When a filesystem is frozen with FIFREEZE and additionally frozen via bdev_freeze() -- which nests by design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives -EINVAL from the holder op although its freeze reference was dropped, and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances the count. After the user's FITHAW and umount, the block device can never be mounted again: dm-1: Can't mount, blockdev is frozen There is no way for userspace to drop the leaked count; only destroying the block device (or a reboot) recovers the device. Reproducer (any kernel since v6.8): dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0" mkfs.ext4 /dev/mapper/dut mount /dev/mapper/dut /mnt fsfreeze --freeze /mnt # freeze_ucount == 1 dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2 dmsetup resume dut # ucount 2 -> 1, but thaw_super() # returns -EINVAL, so bdev_thaw() # keeps bd_fsfreeze_count at 1 fsfreeze --unfreeze /mnt # filesystem thaws fine umount /mnt mount /dev/mapper/dut /mnt # EBUSY, forever The same happens with fsfreeze held across an LVM snapshot of the origin volume. fs_bdev_thaw()'s documentation already describes the intended semantics: "If this function returns zero it doesn't mean that the filesystem is unfrozen as it may have been frozen multiple times". Restore them by returning 0 when a nested thaw drops its hold while other freezers remain. Thawing without holding a freeze still fails with -EINVAL as may_unfreeze() rejects that case before the reference count is touched.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: cpufreq: initialize policy rwsem before sysfs publication cpufreq_policy_alloc() initializes policy->rwsem after kobject_init_and_add() has created the policy sysfs directory and its default attributes. A sysfs access can therefore reach a policy callback before the semaphore has been initialized. Initialize policy->rwsem before publishing the policy kobject so sysfs callbacks always see an initialized semaphore.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: cpufreq: zero-initialize policy cpumask before sysfs publication cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(), i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate kmalloc_node() allocation, so its bitmap holds whatever the slab allocator left behind: cpufreq_online() cpufreq_policy_alloc() alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */ kobject_init_and_add() /* policy%u/ appears in sysfs */ cpufreq_policy_online() cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */ This leaves a window in which the sysfs attributes are already reachable while policy->cpus is still garbage. show()/store() gate on policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero bitmap makes them run the attribute callbacks on a policy that is not initialized yet. Fix this by using zalloc_cpumask_var() for policy->cpus.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Don't leak return code when parsing firmware format v2 When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally ignores all security headers. However, the implementation simply breaks from a switch statement and leaks uninitialized return code `rc' (if the first section is a security one) or the previous section's `rc'. Fix it by really skipping a loop with `continue'. For consistency and readability, also do the same for the default case.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: initialize IRQ lock before requesting IRQ uni_reader_init() registers the shared IRQ before initializing reader->irq_lock. A pending interrupt can invoke the handler while the lock is still uninitialized. Initialize the lock before registering the IRQ so the interrupt path always sees valid lock state.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM size is 0 on mapping failure On a mapping failure of the SRAM, the SRAM size is left as non-zero. The probe will succeed as the error return is not checked since having SRAM is not a hard requirement. The non-zero size allows jobs to access SRAM which is left pointing to physical base address 0x0.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure cmd stream ends with a stop op While the QSIZE register setting should prevent an out of bounds access of the command stream, it is not clear whether the h/w generates an interrupt in this case as is required (to prevent a timeout). As a stop op is expected end of the command stream, let's just ensure it is present. A stop op in the middle of the command stream also makes no sense.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix ethosu_job_open() return value A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop the WARN_ON() as the FD open will pass the return code to userspace and there's only one possible source of the error (drm_sched_entity_init()).

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag.

Keep an eye · NVD Record