Linux Kernel Vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: namespace: unhash a dentry before detaching the mounts on it unlink(), rmdir() and rename() remove the entry from the filesystem, call detach_mounts() on the entry with the inode locked and then call d_delete() once the inode is unlocked. The thing is that between detach_mounts() and d_delete() the dentry is still hashed and positive. But after detach_mounts() nothing covers the dentry anymore. A lookup that finds this dentry in the dcache can uncover what the mounts hid. That's a problem when unlinking files or directories that are mountpoints in other mount namespaces. Everybody who had the underlying entry covered can race the detach_mount() call until d_delete() has run. The race window isn't all that small. It encompasses namespace_unlock() with a full synchronize_rcu_expedited() grace period and the inode_unlock() of the entry. In my experiments three walkers that kept trying read an overmounted file in 11938 of the 16140 unlinks that removed its mountpoint from a bind mount of the filesystem within a minute. Fun fact, d_invalidate() has the same ordering problem but gets it right. It unhashes the dentry first and detaches the mounts afterwards. Let's do the same in __detach_mounts(): - A lookup that hasn't found the dentry yet misses it in the dcache and waits for the directory lock that the caller holds until the name is gone for good. - A lockless lookup that found it already fails the mount_lock check while the dentry still counts as a mountpoint and the d_seq check once it doesn't, and retries. This fixes the lockless path. We still need to fix the reference count lookup in a follow-up patch. So d_drop() the dentry. The dentry stays positive and held but can't be found anymore. Then proceed with the detach and unlink. Reproducer: The reads were counted with the program below, three walkers for 60 s in a VM with 4 CPUs. The race window is stretched with the debug patch pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it found a mountpoint dentry and before its mounts are crossed. fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts() and d_delete(). // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against lookups that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 wh ---truncated---

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix heap out-of-bounds write in krb5_authenticate() In krb5_authenticate(), out_len is calculated to determine available headroom in response_buf for the incoming Kerberos AP-REP token. However, when SMB2_SESSION_SETUP is processed as a non-first element of a compounded SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off. This causes out_len to overstate remaining buffer headroom by the cumulative size of prior responses in the compound chain. Consequently, the length check in ksmbd_krb5_authenticate() (*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy() to write the AP-REP blob past the end of response_buf into adjacent kernel heap memory. Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len, ensuring it accurately reflects physical remaining buffer space.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: never expire a locked mount Locked mounts are special. They protect the underlying files and directories from being revealed. do_umount() refuses to unmount locked mounts but shrink_submounts() doesn't. A shrinkable mount can become locked once the owner of a user namespace puts it beneath a locked mount with MOVE_MOUNT_BENEATH. The locked property now moves to the mount at the bottom making it possible to unmount the top mount. So umount() of an unlocked ancestor now expires the bottom mount first and the covered directory is revealed: move_mount(c -> x/hidden, MOVE_MOUNT_BENEATH) = 0 the cover after the lock moved: umount2(x/hidden) = 0 the holder of the lock: umount2(x/hidden) = EINVAL the root of the copy, busy: umount2(x) = EBUSY reads x/hidden/secret: "covered-by-root" So leave a locked mount alone as it dies together with its parent. A plain umount() of an unlocked mount with a locked one below it is EBUSY from now on. It's the same for any other locked child. A lazy umount still takes the whole tree. mark_mounts_for_expiry() never sees a locked mount. lock_mnt_tree() leaves a mount on an expiry list alone and nothing else puts a locked one on such a list. Add an assert for this.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix sched scan IE sizing Scheduled scan built the probe request before iwl_mvm_scan_fits(), so oversized IEs could be copied into the fixed preq buffer before length validation. Move iwl_mvm_build_scan_probe() after the fits check. Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len() so userspace limits account for driver-inserted DS/TPC bytes.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: mark the rcu locked areas properly When we bump the uref counter, there's no need to keep the rcu lock because the referred hash table can't disappear. Also, from the same reason in mtype_gc we need the rcu lock and not a spinlock.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could get left over after the steam object was torn down. This is also fixed here.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: HID: steam: Rearrange teardown sequence This fixes a narrow window during the teardown sequence where callbacks could still be scheduled during cleanup that would then have a dangling pointer to the now-freed steam struct. This also puts work canceling for rumble and mode switch in steam_unregister, as that shouldn't persist while the client hdev is open.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range-to-eof file size exchange Norbert Szetei posted a patch containing an incomplete description of a bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks exchange-range into modifying a file so that it has shared blocks starting beyond EOF, which is never allowed because files never have written data beyond EOF, and you can only share written data blocks. This is key to all the incorrect behavior that follows. Eventually I got from Norbert a description of what's going wrong: > Fair. Here it is with physical block numbers, 4k blocks. peer is the file > that gets rewritten and file1 is the one that ends up with the flag > cleared. > > Start, nothing shared: > > peer size 4096 -> [100] > file1 size 12288 -> [200] [201] [202] > donor1 size 4096 -> [300] > donor2 size 4096 -> [400] > > 1. FICLONERANGE peer's block into file1's middle slot: > > peer size 4096 -> [100] > file1 size 12288 -> [200] [100] [202] reflink flag set > ^^^^^ both files own block 100 > > 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0, > file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes > are exchanged with it: > > file1 size 4096 -> [200] [100] [300] reflink flag set > ^^^^^^^^^^^ still owned, now past the size > donor1 size 12288 -> [202] > > file1 says it is one block long while it still owns three. Nothing was > unmapped. file2_offset is block 2, so this exchange cannot clear a flag. > > 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096. > By i_disk_size this is two one-block files exchanging everything, so > xmi_can_exchange_reflink_flags() agrees and the flag is cleared: > > file1 size 4096 -> [400] [100] [300] reflink flag CLEARED > donor2 size 4096 -> [200] > > Block 100 is still shared with peer. > > 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100. > xfs_is_cow_inode(file1) is false, so no CoW: > > peer size 4096 -> [100] same block, new contents > > Block 100 is the only one that matters here. PoC below, it reads a file > called peer in the current directory. The filesystem needs reflink and > exchange-range, which mkfs.xfs 7.x turns on by default. So yes, TO_EOF is screwing up the file size even if it's actually exchanging the data block correctly. The following is the intended behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage: "Ignore the length parameter. All bytes in file1_fd from file1_offset to EOF are moved to file2_fd, and file2's size is set to (file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in file2 from file2_offset to EOF are moved to file1 and file1's size is set to (file1_offset+(file2_length-file2_offset))." In other words, if we only exchange a portion of the file data, then we should only exchange the portion of the file size that relates to the exchanged data. Unfortunately, the code swaps the ondisk file size and the incore file sizes, which is incorrect if the caller passes in a nonzero offset. Having confused the file sizes, the PoC uses a second exchange-range call on what looks like a non-reflinked single-block file. Because the file size is set incorrectly, exchange-range thinks it's exchanging the full contents of two files and clears the reflink flag on the broken file. That enables an extending write of the broken file to rewrite the shared block that's just past EOF. This has become known colloquially as refluxfs. Once the file sizes are set correctly, the second exchange-range no longer thinks that it's doing a full-contents swap, so it won't clear the reflink flag on either of its file arguments. Norbert followed up to an earlier version of this patch with a second complaint about us not handling the i_disk_size state correctly: > The offsets are bounded against the incore i_size but subtracted from > ---truncated---

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: xfs: stop exchanging reflink flags when exchanging mappings When an exchange covers both files from offset 0 to i_disk_size, xmi_can_exchange_reflink_flags() assumes every mapping moved and hands the reflink flag over to the other file. That assumption is wrong. A file can still own shared blocks past i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size without unmapping anything. The flag is cleared anyway, and the next write to such a block happens in place instead of CoW, corrupting the other file that shares it. Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN") fixed one instance of this. Rather than add another special case, stop moving the flags. xfs_exchmaps_ensure_reflink() already sets the flag on both inodes before the exchange, so both just keep it. Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older kernels may still carry them; recovery already masks them off, so they stay in the log format mask and are ignored. XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from one inode to the other along with the extents. Just removing that is not enough here: the exchange path flags both inodes up front in xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the inode receiving the shared extents would be left without the flag. Set it on both inodes instead, and make sure both have a CoW fork, since an inode with the reflink flag is expected to have one. The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a truncate to zero removes it.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: keep the lock on a mount that a propagated copy is moved beneath attach_recursive_mnt() transfers MNT_LOCKED from the top mount to the mount that is moved beneath it with MOVE_MOUNT_BENEATH. This allows the owner of a user namespace to replace its locked /proc or its root. The mount beneath takes on the job of covering the underlying mountpoint allowing the top mount to be unmounted. Consider two mount namespaces: (H) The host H has a shared mount P with a secret in P/d (Z) Z is a user namespace made from M. Its copy of P receives propagation from the host's P and its copy of M's cover on P/d is locked Z's owner must not get to see P/d. Now (H) mounts X on P/d. This propagates into (Z). The copy of X lands beneath (Z)'s locked cover. The locked property is transfered from (Z)'s cover to the copy of X propagated beneath it. The cover is now unlocked. Now (H) unmounts X again. The copy of X in (Z) gets unmounted and the covering mount is left unlocked on top of P/d. (Z) can now unmount it: Z: umount2(P/d) = EINVAL /* the cover is locked */ H: mount X on P/d, umount X /* both propagate into Z /* Z: umount2(P/d) = 0 /* the cover is now unlocked */ Z: read P/d/secret = "covered-by-root" /* secret revealed */ So only transfer the locked property to the mount beneath for mounts the caller has placed. A propagated copy that lands beneath a locked mount is locked as well so that the mount at the bottom of the stack carries a lock the way every check expects. The mount on top of it remains locked to ensure that it keeps covering even if the propagated mount is unmounted again.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: don't let a pseudo dentry become the root of a mount d_alloc_pseudo() hands out dentries for pipes, sockets and other files that are never anyone's child or parent. They carry DCACHE_NORCU and dentry_free() frees them right away because no lockless path walk can ever reach them. That holds as long as such a dentry isn't the root of a mount. But bind mounting /proc/self/fd/<fd> of such a file does exactly that. Most callers of alloc_file_pseudo() put their files on kernel-internal mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It places the token file on the bpffs mount the caller handed it and that mount is in the caller's mount namespace so the clone goes through: mount --bind /proc/self/fd/<token> <file> open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount() __follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq and d_flags of the dentry and only then checks mount_lock. The dentry can be gone by then. The final mntput() of an unmounted parent unhooks a child that stayed attached to it under mount_lock alone. When the child's holder does the final put right after that the root is dput() and freed immediately while a walker that found the mount hashed still looks at it. Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing sensible can be done with a bind mount of a bpf token anyway.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: queue a mount only once for mount notifications mnt_notify_add() puts a mount on notify_list. It doesn't check whether the mount is on the list already. That's fine as long as every mount is queued at most once per namespace_sem hold. It isn't. propagate_umount() moves a surviving overmount off a stack of mounts that are going away and queues it as moved. shrink_submounts() and mark_mounts_for_expiry() call umount_tree() for several mounts under a single namespace_sem hold. So the second umount_tree() can take down exactly the mount the first one reparented, reparent it once more and so end up queueing it a second time. The second list_add_tail() cuts the mounts queued in between out of the list while the head still points at the last of them. notify_mnt_list() then only visits that one mount and the others are freed after the grace period with notify_list still pointing at them. Every later mount operation on the host walks freed memory: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report Read of size 8 at addr ffff8881003d57e0 by task notify_dq/162 __list_add_valid_or_report+0x15c/0x1a0 mnt_add_to_ns+0x322/0x890 attach_recursive_mnt.isra.0+0xf2a/0x1a00 path_mount+0x139c/0x1d40 This needs a mount with MNT_SHRINKABLE to bind from. That's what finish_automount() creates (submounts of NFS, AFS and CIFS and the tracefs mount below debugfs). Bind mounts inherit the flag. A mount namespace with a FAN_MARK_MNTNS mark does the rest and root in a user namespace can have both. Initialize to_notify in alloc_vfsmnt() and leave a mount alone that is queued already. mnt_notify() looks at the state the mount has when the list is drained so a single entry per mount is enough. The move event for a mount that is unmounted under the same hold is lost. That's fine. The detach is what matters.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: namespace: reset the old parent's ->overmount in mnt_change_mountpoint() __umount_mnt() resets ->overmount of the parent when it unmounts the mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the mount to its new parent and leaves the old one pointing at it. For a mount that is moved beneath in attach_recursive_mnt() that doesn't matter. The new mount has already reset ->overmount of the old parent by the time the old top mount is moved onto it. It matters for reparent() though. propagate_umount() moves a surviving overmount onto the first ancestor that isn't going to be unmounted. The mount it was taken from is unmounted immediately afterwards. If a file descriptor keeps that unmounted mount alive ->overmount points at the moved mount. That's a dangling pointer and UAF as the moved mount is unmounted and freed. do_lock_mount() follows ->overmount from the target path under mount_lock. With a file descriptor on such a mount as the target of a mount beneath topmost_overmount() walks into the freed mount and do_lock_mount() takes references on whatever it finds there. So reset ->overmount of the old parent in mnt_change_mountpoint() the same way __umount_mnt() does. A mount's ->overmount is then always a mount that is attached to it.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin xe_bo_pin_external() and xe_bo_unpin_external() maintain the bo's pinned_link list membership in xe->pinned.late.external, based on whether the current call is the outermost pin or the final unpin. However, the same external bo's pin_count can also be raised and lowered directly by __xe_pin_fb_vma()/__xe_unpin_fb_vma(), which pin the bo as a display scanout buffer without going through xe_bo_pin_external()/xe_bo_unpin_external() at all, and have no notion of, or ownership over, pinned_link. If a bo is pinned both externally (e.g. dma-buf export) and as an fb, and the external unpin happens first, xe_bo_unpin_external() correctly observes pin_count > 1 and leaves the bo on pinned_link. When the fb unpin later performs the true last unpin (pin_count 1 -> 0), it never touches pinned_link, leaving the bo linked on xe->pinned.late.external indefinitely. Once the bo is subsequently freed, this stale list entry points into freed memory, corrupting the list and risking a use-after-free the next time the list is walked or spliced. The backup object pin/unpin sites in xe_bo_notifier_prepare_pinned()/ xe_bo_notifier_unprepare_pinned() have the same bypass characteristic, though they never add their bo to a pinned list, so are not affected by this particular list-corruption issue. Move the pinned_link removal into xe_bo_account_unpin(), which already runs on every unpin path (kernel, external, framebuffer, backup object) right before the true 1 -> 0 pin_count transition. Since list_del_init() only operates on the node itself, this removal is list-agnostic and safe to perform regardless of which list (external or kernel_bo_present) the bo happens to be linked on, or which code path is performing the final unpin. Drop the now-redundant explicit list_del_init() calls in xe_bo_unpin_external() and xe_bo_unpin(). v2: - New patch v3: - Rebased on changes to previous patch. (cherry picked from commit ca58d36a1f93af586ee93b340c9f9fd81312cc01)

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Prevent overstepping exec array boundary It is possible for eb_relocate_parse_slow() to call kvfree() on entries outside the original exec array during following scenario inside eb_relocate_parse_slow(): 1) eb_copy_relocations() allocates as many as eb->buffer_count copies for exec entries; 2) eb_parse() appends up to two VMAs, right after incrementing eb->buffer_count; 3) cleanup under "out" label uses this incremented buffer_count to release relocation pointers from exec array via kvfree(), not from VMA array. To amend this problem, ensure that relocation cleanup uses the original exec object count, excluding the VMAs appended by the command parser. (cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9)

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Reject concurrent BIS listener setup iso_sock_listen() drops the socket lock before calling iso_listen_bis() to preserve the hdev->lock ordering. Two concurrent listen() calls on the same broadcast socket can therefore both observe BT_BOUND. Caller A can attach connA and release the locks, then caller B can acquire them and attach connB before A publishes BT_LISTEN. __iso_chan_add() checks whether connB already has a socket, but not whether the socket already has a connection. The second attachment overwrites iso_pi(sk)->conn, leaking the connA reference and leaving connA->sk intact. Socket teardown follows connB, so later events on connA can cause a stale socket access. Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking both the HCI device and socket locks in iso_listen_bis(). The connection check also covers the interval between attachment and publication of BT_LISTEN. Reject a competing setup with -EBADFD through the existing unlock path before allocating another connection. A recorded KASAN report from an instrumented kernel shows: BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0 Call Trace: iso_sock_hold+0x119/0x1f0 iso_conn_del+0xe4/0x270 hci_disconn_complete_evt+0x351/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 Allocated by task 93: sk_prot_alloc+0x113/0x220 sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 93: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 sock_close+0x10/0x20

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix command skb lifetime during scan setup During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the address used for the PA_LINK lookup from hci_sent_cmd_data(). The returned pointer borrows storage from sent_cmd or req_skb, without holding a reference to either skb. The scan worker runs on req_workqueue while hci_cmd_work() runs on the separate device workqueue. After the scan worker loads sent_cmd, the command worker can free and replace it before hci_sent_cmd_data() dereferences the skb. The command payload can also be freed between returning from the helper and comparing the address. The connection lookup's RCU critical section does not protect the command skb. KASAN reported: BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_sent_cmd_data+0x27c/0x2f0 hci_le_set_scan_param_sync+0x43a/0x850 hci_passive_scan_sync+0xb09/0x1460 hci_update_passive_scan_sync+0x47c/0x6e0 hci_le_pa_create_sync+0x200/0xa70 hci_cmd_sync_work+0x13c/0x290 Allocated by task 95: skb_clone+0x13f/0x340 hci_cmd_work+0x2a9/0x7e0 Freed by task 95: kmem_cache_free+0xba/0x3a0 hci_cmd_work+0x29c/0x7e0 Use hdev->lock to serialize the address snapshot with sent_cmd replacement. Protect req_skb replacement and completion cleanup with the same lock because the helper falls back to that skb. Copy the address before releasing the lock and use the copy for the existing RCU-protected connection lookup. Release the mutex before sending or waiting for commands, preserving the lookup and completion ordering.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: riscv: futex: untag the user pointer before the atomic access access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a user pointer whose top PMLEN bits hold a tag passes access_ok() after untagging, but the atomic is then performed on the still-tagged raw address. Supervisor-mode data accesses are not subject to the U-mode pointer masking (that is governed by menvcfg.PMM, which the kernel does not set), so hardware does not strip the tag for the kernel's own access. With Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a tagged pointer can name a canonical kernel virtual address (e.g. in the linear map) whose untagged form is a valid user address. An unprivileged process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result serving as a read oracle. get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer after the access_ok() check; do the same in the futex helpers so the atomic operates on the address that was actually validated.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: riscv: entry: gate shadow call stack reload on sstatus.SPP, not tp Under CONFIG_SHADOW_CALL_STACK, handle_exception() reloads the kernel shadow call stack pointer (gp) only when the trap came from userspace. It made that decision with scs_load_current_if_task_changed, which compares the trap-time tp (read back from sscratch into s5) against the current tp: beq \prev, tp, _skip_scs scs_load_current _skip_scs: tp is a user-writable register. A user task that sets tp to the linear-map address of its own task_struct (&current) before trapping makes the comparison succeed (can achieve by brute force with KASLR enable under our test), so the kernel skips scs_load_current and keeps running with the gp that userspace left in place. Under CONFIG_SHADOW_CALL_STACK gp is the shadow call stack pointer and load_global_pointer is a no-op, so the compiler-emitted "sd ra, -8(gp)" / "ld ra, -8(gp)" in every non-leaf function then write to, and return through, an attacker-controlled address -- an unprivileged kernel arbitrary-write and control-flow-hijack primitive. The poisoned gp is saved to task_struct.scs_sp on return, so the reload is skipped on every subsequent entry as well. Decide "came from userspace" from the hardware sstatus.SPP bit (already in s1 at this point) instead of from tp, mirroring the check that ret_from_exception already uses a few instructions later. SPP is written by hardware on trap entry and cannot be forged from U-mode. Legitimate behaviour is unchanged: user entries (SPP=0) reload the task shadow call stack, nested kernel entries (SPP=1) skip it.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net/smc: protect clcsock lifetime in smc_getname smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix race when arming the IRQ poll worker gpio_mpsse_irq_enable() arms the poll worker before publishing it: schedule_work() runs before the worker is added to priv->workers. If gpio_mpsse_disconnect() walks the list in that window it misses the worker, and once disconnect returns, the USB core frees mpsse_priv while the orphaned gpio_mpsse_poll() work keeps accessing it, causing a use-after-free. Fix this by publishing and arming the worker in one irq_spin critical section. Teardown walks the same list under irq_spin, so a worker found on the list is guaranteed to be armed, and cancel_work_sync() handles it whether it is queued or running. A worker armed after the disconnect walk would still be missed, so also set a new priv->dying flag under irq_spin before the teardown walk, and check it in the same critical section, freeing it via kfree_rcu() instead when the device is going away, since kfree() would be called with the IRQ core's raw spinlock held and may sleep on PREEMPT_RT. schedule_work() is safe to call with irq_spin held, and the next probe gets a fresh mpsse_priv, so the flag never needs to be cleared. This issue was found by an in-house static analysis tool.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: fsverity: RCU-delay the freeing of struct fsverity_info __fsverity_get_info() calls rhashtable_lookup_fast(), which just uses rcu_read_lock() and doesn't directly synchronize with fsverity_remove_info(). For the same inode this isn't a problem: its fsverity_info is removed only at inode eviction time or upon failure to enable verity, when the inode no longer needs its fsverity_info and it will no longer be accessed via that inode. However, this is broken and can cause a use-after-free for concurrent __fsverity_get_info() for *different* inodes. Those rely on following fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only. They also use fsverity_info::inode to do the key comparison. Fix this by RCU-delaying the freeing of 'struct fsverity_info' after it's been removed from the rhashtable.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tipc: hold a reference to nodes found by link name tipc_node_find_by_name() returns a node after dropping its RCU read lock without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS handlers then lock and access the node, racing with timer-driven cleanup of a down peer. Generic netlink serialization does not exclude the node timer. The following interleaving can leave a handler using a freed node: CPU 0: find the node under RCU and release the node read lock CPU 1: tipc_node_timeout() clears the links and unlinks the down node CPU 1: drop the list and timer references, queuing tipc_node_free() CPU 0: leave the RCU read-side critical section CPU 1: complete the grace period and free the node CPU 0: acquire the node lock through the stale pointer LINK_SET also uses the node's media address after releasing the node lock, when passing queued packets to tipc_bearer_xmit(). KASAN on v7.3-rc5 reported: BUG: KASAN: slab-use-after-free in _raw_read_lock_bh Write of size 4 at addr ffff88807e06f008 by task poc/92 Call Trace: _raw_read_lock_bh kernel/locking/spinlock.c:287 tipc_nl_node_set_link net/tipc/node.c:2475 genl_family_rcv_msg_doit net/netlink/genetlink.c:1114 genl_rcv_msg net/netlink/genetlink.c:1209 netlink_rcv_skb net/netlink/af_netlink.c:2575 Allocated by task 0: tipc_node_create net/tipc/node.c:539 tipc_node_check_dest net/tipc/node.c:1196 tipc_disc_rcv net/tipc/discover.c:252 Freed by task 92: kfree mm/slub.c:6801 rcu_core kernel/rcu/tree.c:2919 Last potentially related work creation: __call_rcu_common.constprop.0 kernel/rcu/tree.c:3181 tipc_node_timeout net/tipc/node.c:814 Acquire a reference to the selected node with kref_get_unless_zero() before leaving RCU, returning NULL if the node has already been released. Release that reference on every caller exit after the last node access, including transmission in LINK_SET. Keep the existing link lookup order and locking so concurrent link removal still takes the existing error paths.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tipc: destroy topsrv workqueues before closing connections tipc_topsrv_stop() closed subscriber connections while the topology server's send and receive workqueues were still running. Socket callbacks and subscription events could then queue more work, and in-flight send/recv work could drop the last connection reference during the conn_idr walk. That race produced several teardown failures: refcount_t addition on 0 from conn_get() on a connection whose release was blocked on idr_lock, a subsequent use-after-free in tipc_conn_close(), queue_work() on an already destroyed workqueue from the listener data-ready callback, and an RCU stall in tipc_topsrv_exit_net() while the walk spun under idr_lock. Clear srv->listener under idr_lock so it acts as a shutdown flag, skip queue_work() once it is NULL, destroy the workqueues to flush in-flight work, and only then close the remaining connections. Refuse tipc_conn_lookup() after that flag is cleared, and drop idr_lock when the teardown walk finds no connection, so an in-flight subscription event cannot pin idr_in_use while the walk holds the lock. v3 supersedes the narrower in-thread diff Tung Quang Nguyen posted on 2026-09-23. It keeps his teardown order and adds the lookup refusal and the empty-idr unlock.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: strparser: make sure __strp_recv isn't running before tearing down the parser The comment above strp_done() claims that if strp is stopped, strp_recv will no longer be called. That's only true if the caller has a mechanism (eg locking) to guarantee that strp_recv() calls that started before strp_stop() have completed by the time we call strp_done(). This adds a dummy lock_sock/release_sock pair to guarantee that any in-flight strp_recv() (which runs under either bh_lock_sock or lock_sock, depending if it's called from ->sk_data_ready or strp_work) has completed. Only espintcp can be affected by this race condition, but this patch makes sure no future user of strp can have the bug. This could crash on strp->sk ("general mode" of strp), but this mode has been here for 9 years and has never been used. It'll be gone soon, no point worrying about it. Switch the stopped/paused/etc bits to u8's to avoid races between strp_stop() and strp_pause/unpause(). A reproducer has been published and turns the possible UAF into an exploit [1].

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: wireguard: noise: reject response consumption after intermediate initiation Two threads begin processing the identical response message, received twice. The first thread, A, runs. While it's running, the second one, B, gets partway through, and during that slow calculation, or even while blocking on down_write(), A completes and then also a handshake initiation that's already been queued up runs in thread C, which itself takes that same down_write(). The handshake initiation creation succeeds, and sets the state back to waiting-for-response, and calls up_write(), at which point thread B resumes, because either its finished its calculations or was finally allowed to acquire down_write(). Thread B then copies the state back to the peer, and begins a new session, using that state, which is the same session as the one made in thread A. Thread A Thread B Thread C down_read() sA = handshake->state memcpy(cA, handshake->crypto) up_read() if (sA != 1) goto fail slow_crypto(cA) down_read() sB = handshake->state memcpy(cB, handshake->crypto) up_read() if (sB != 1) goto fail slow_crypto(cB) down_write() if (sA != handshake->state) goto fail memcpy(handshake->crypto, cA) handshake->state = 2 up_write() down_write() if (handshake->state != 2) goto fail derive_session(handshake->crypto) up_write() down_write() slow_crypto(handshake->crypto) handshake->state = 1 up_write() down_write() if (sB != handshake->state) goto fail memcpy(handshake->crypto, cB) handshake->state = 2 up_write() down_write() if (handshake->state != 2) goto fail derive_session(handshake->crypto) up_write() This seems basically impossible to hit in a meaningful way in practice, but ensure that it absolutely cannot happen by comparing the ephemeral private key that's on the stack with the latest one that the peer's handshake state has.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix the error path in dpaa2_switch_rx() In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd() function is called in order to free the FD. This is incorrect since the dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors, meaning that it expects in the software annotation area of the FD data to find a valid skb pointer on which to call dev_kfree_skb(). Fix this by extracting the dma_unmap_page() from dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx() function. This allows us to directly use free_pages() in case of an error before an SKB was created and kfree_skb() afterwards.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: nvmet: use the local P2P device on metadata allocation failure nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data and metadata SGL allocations succeed. If the data allocation succeeds but the metadata allocation fails, out_free_sg passes req->p2p_dev to pci_p2pmem_free_sgl() before that assignment has taken place. Pass the local p2p_dev argument instead, so cleanup uses the same PCI device as the successful data allocation.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ice: Restore Ordered MMIO Writes for Tx Doorbells The DQL accounting state which tracks the number of bytes queued for the NIC to transmit, namely dql->num_queued, is updated by the ICE driver when it invokes __netdev_tx_sent_queue(). Subsequently the driver updates the hardware queue tail allowing the NIC to begin processing the work queue. The queue accounting update should be ordered before the NIC begins transmitting descriptors. The transmit path currently updates the hardware doorbell using writel_relaxed(), which (on arm64) does not provide the same ordering guarantees between writes to normal memory and writes to MMIO registers that writel() does. This introduces a potential race where the NIC begins transmitting descriptors before the dql->num_queued update is globally visible. If the NIC finishes before the update is observed by dql_completed(), it detects an invalid state where more bytes have been completed than have been queued. When this happens the following BUG_ON is triggered. BUG_ON(count > num_queued - dql->num_completed); This has been observed and manifests as the following crash (note that the trace has been trimmed) in an environment with sustained network load that uses an Intel Corporation Ethernet Controller E810-XXV for SFP (rev 02) on an arm64 machine. Replacing writel_relaxed() with writel() in a test kernel eliminated the crash in the user's workload, which previously reproduced the issue reliably. kernel BUG at lib/dynamic_queue_limits.c:99 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x268/0x2a0 lr : ice_clean_tx_irq+0x1d4/0x620 [ice] Call trace: dql_completed+0x268/0x2a0 (P) ice_napi_poll+0x94/0x520 [ice] __napi_poll+0x48/0x3f0 net_rx_action+0x194/0x420 This restores the behaviour prior to commit ccde82e90946 ("ice: add E830 Earliest TxTime First Offload support"), which changed the notification mechanism from writel() to writel_relaxed().

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits() When skb_copy_and_csum_bits() reaches unreadable frags it returns 0 after copying only the linear part, and the rest of the caller's buffer is left as it was. The callers copy into a buffer that is about to go out on the wire: an ICMP error quoting the offending packet, or a driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer is zeroed beforehand, so whatever was in memory there gets sent. Zero the part of the buffer we didn't fill. The checksum usually won't match the data any more, so the receiver will usually drop the packet, but either way it no longer carries anything it shouldn't. Only zero for a positive @len, a negative one from a broken caller must not turn into a huge memset().

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak on error descriptor When the error bit is set in the RX completion descriptor, the buf_state and its attached buffer should be freed. In the case of AF_XDP ZC, the XSK buffer was not freed, leading to a leak. This issue was caught by LLM.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Fix use-after-free in error paths In both altr_edac_a10_device_add() and altr_portb_setup(), the error path freed the dci structure before releasing the devres group. Since the managed single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an IRQ firing between freeing dci and unregistering the IRQs could dereference the freed memory. Release the devres group first so the managed IRQs are unregistered before the dci structure is freed.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ipv4: udp: Create exceptions before socket matching Currently, when ICMP Fragmentation Needed and Redirect Message packets are locally delivered and quote a UDP packet, a FIB nexthop exception (FNHE) is only created if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the FNHE cache in order to discover the ephemeral port used by a connected UDP socket. Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the FNHE cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating a FNHE, even before trying to find a matching socket. Do that by calling ipv4_update_pmtu() and ipv4_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in a FNHE being created or updated in the cache that the attacker can observe. Pass an oif of 0, in a similar fashion to icmp_err(). This is also the oif used by the socket path for sockets that are not bound to a device. Note that this does not allow attackers to create FNHEs that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMP error that quotes an ICMP Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ipv4_sk_update_pmtu() / ipv4_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the FNHE cache of the nexthop resolved by the no socket helpers and another in the FNHE cache of the nexthop used by the socket.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: pfcp: make sure the SEID is linear before reading it pfcp_encap_recv() only makes sure that the UDP header and the 4 byte PFCP header are in the linear area. When the S flag is set, pfcp_session_recv() then reads the 8 byte SEID that follows, which is not covered by the pskb_may_pull() check. A short PFCP packet with the S flag set, or one whose session header lies in a fragment, therefore makes pfcp_session_recv() read beyond the end of the packet data, and whatever it finds there is stored in the tunnel metadata that flower later classifies on. Pull up to the end of the SEID before reading it, and drop packets that are too short to contain it. Reload the header pointer afterwards since pskb_may_pull() may reallocate the skb head. Use offsetofend() rather than sizeof(struct pfcphdr_session): the structure is not packed, so its size is 16 bytes because of the alignment of the __be64 member, while the header on the wire is only 12 bytes, and valid session messages would be dropped.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata() sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a strong reference under hdev->lock: hci_dev_lock(hdev); hcon = hci_conn_hash_lookup_handle(hdev, handle); ... conn = sco_conn_hold_unless_zero(hcon->sco_data); hci_dev_unlock(hdev); but the pointer is cleared from the other side without that lock. When the last sco_conn reference is dropped, sco_conn_free() ran conn->hcon->sco_data = NULL; with no hdev->lock held, so the RX path could read hcon->sco_data and call kref_get_unless_zero() on an sco_conn that was concurrently freed: BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160 Write of size 4 by task kworker/u17:0 Workqueue: hci0 hci_rx_work Call Trace: sco_conn_hold_unless_zero+0xbe/0x160 sco_recv_scodata+0x13f/0x490 hci_rx_work+0x3af/0x730 kref_get_unless_zero() only guards against a zero refcount, not against the backing memory already being freed. Give hcon->sco_data an actual reference on the sco_conn it points to, so the object cannot be freed while the pointer is still installed, and only clear and drop it from sco_conn_del(), which runs under hdev->lock (its callers, sco_connect_cfm() and sco_disconn_cfm(), hold it). The reader in sco_recv_scodata() also takes hdev->lock, so the store and the read are now serialised: the RX path either observes NULL or a reference that is guaranteed to stay valid until it drops its own. sco_conn_add() no longer hands its kref_init() reference to the caller as the connection's only reference; that initial reference is the one owned by hcon->sco_data, and callers get their own via sco_conn_hold(). Because the sco_conn can now outlive the socket (the association keeps it alive until the link goes down), the hci_conn can no longer be dropped from sco_conn_free() without regressing socket close: closing a connected SCO socket must still tear the link down. Move hci_conn ownership to the socket instead: __sco_chan_add() takes an hci_conn reference and it is released from sco_chan_del() and sco_sock_destruct(), exactly once. The sco_conn no longer owns an hci_conn reference, so sco_conn_add() stops consuming one and sco_connect() drops the hci_connect_sco() reference on every path; sco_connect_cfm() no longer needs its hci_conn_hold() dance.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Handle destroying table that has a miss table If a table has a miss table that was created by 'mlx5hws_table_set_default_miss' API function, its miss_tbl keeps the table that points to it in a list. If such table is deleted, we need to also remove it from the miss_tbl list, otherwise the node in miss_tbl list will contain garbage.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix life cycle of the nested_mmus array The nested_mmus array holds the shadow page tables that are used when a guest is running a nested context. These structures are allocated on VCPU_INIT for whole guest, which implies that they may have to be relocated as the array grows. Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and that the allocation requires relocation, that vcpu will still be running with a pointer to the previous structure, which will have been freed. Fix this by turning the array of structures to an array of pointers, which is now allocated at VM creation, sized to the absolute maximum that KVM can handle. In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No reallocation is ever performed, and the life cycle of each object is much clearer: - the nested_mmus array is allocated in kvm_init_nested(), and freed in kvm_arch_destroy_vm() - s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed on kvm_arch_flush_shadow_all() Finally, the freeing of vcpu->arch.vncr_array is made consistent rather than being done on some failure paths, but not others.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable large folios on encrypted inodes Commit 709f0f1f1bf5 ("ext4: add checks for large folio incompatibilities when BS > PS") disables large folios at mount time if the "encrypt" feature is set. However, enabling that feature on a mounted filesystem circumvents that check, and writing encrypted data results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work RIP: 0010:ext4_finish_bio+0xf7/0x3e0 Call Trace: ext4_release_io_end+0x51/0x110 ext4_end_io_end+0x4c/0xe0 ext4_end_io_rsv_work+0xb3/0x100 Fix this by disabling large folios on encrypted inodes, as is already done for inodes that use data journaling. This affects all kernels between v6.19 and v7.2, but it is not needed in v7.3, where the code was significantly refactored.

Patch this week · NVD Record

In the Linux kernel, the following vulnerability has been resolved: riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE errata_probe_ghostwrite() only marks the CPU as vulnerable when it is called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation in ghostwrite_enable_mitigation() only takes effect if the vulnerable state was recorded before the boot alternatives are patched. The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the early alternatives never run, so ghostwrite_state is never set to VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector remains enabled, and sysfs reports "Not affected" on a vulnerable T-Head C9xx CPU. Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the vulnerability is detected in the early boot stage and the default mitigation is applied.

Patch this week · NVD Record