Linux Kernel Vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix shrinker accounting double-subtraction on nested external pins xe_bo_pin_external() and xe_bo_unpin_external() support nested pins, since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count refcount rather than a boolean. However, the shrinker accounting calls xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked unconditionally on every pin_external()/unpin_external() call, instead of only on the transition into and out of the pinned state. An external BO (dma-buf) can be pinned more than once while already pinned, for example when it has multiple attachments/importers, each independently calling xe_bo_pin_external(). Each such nested pin subtracts the BO's pages from the shrinker's accounting again, even though the BO's pages were already removed from consideration by the first pin. Symmetrically, each nested unpin adds them back again before the BO is actually unpinned. This desynchronizes the shrinker's page and object counts from reality, and since they are declared as signed long but interpreted as unsigned long in xe_shrinker_count(), the underflow can turn into an enormous shrinkable/purgeable page count, causing the shrinker to be invoked excessively under memory pressure. Guard the accounting calls with the same pin-count transition checks already used to guard the pinned_link list maintenance, so accounting is only updated on the outermost pin and the final unpin. While centralizing this logic into xe_bo_account_pin()/ xe_bo_account_unpin(), also close a second, related accounting gap affecting imported dma-bufs. For an imported bo's ttm_tt, xe's ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's ttm_tt_populate() wrapper unconditionally marks the tt as populated on driver-hook success, so ttm_tt_is_populated() still reports true for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted ttm_tt_is_populated() as a proxy for "these pages are accounted for by the shrinker", and would subtract/add pages for such a tt that were never added in the first place, again underflowing the shrinker's counts. This is reachable today via xe_bo_pin_external(), and would have become newly reachable via the fb-pin path once this patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so fix it here rather than in a later patch, to avoid a commit in this series that introduces the regression before fixing it. Skip the accounting for imported bos, using the same EXTERNAL && !EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate() use to decide whether to act, via a new xe_ttm_bo_is_imported() helper (hoisted up from its only prior use site). v2: - Fix the critical issue caught by Sashiko AI review: the pin-count transition check introduced here was still bypassed by the fb-pin path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a stale pinned_link entry and a permanent shrinker accounting leak when the fb-unpin performed the true last unpin. Addressed in a separate follow-up patch in this series rather than folded in here, since it is a distinct bug with its own Fixes: tag. - Drop the unneeded local "last_unpin" variable in xe_bo_unpin_external(), restoring the original inline bo->ttm.pin_count == 1 check; it was a no-op rename not used by any of the new accounting helpers, and was going to be deleted again by the follow-up patch anyway. v3: - Exclude imported dma-bufs from the pin/unpin shrinker accounting, fixing another underflow caught by Sashiko AI review. - Add a short comment on the backup-object pin site noting it's already populated/accounted at pin time, addressing (as a false-positive clarification, no code fix needed) a separate Medium-severity accounting-leak concern also caught by Sashiko AI ---truncated---

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: cancel the client work on remove xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and schedules i2c->work when the adapter is registered under the xe I2C platform device, and xe_i2c_client_work() then instantiates the AMC client device on that adapter. xe_i2c_remove() tears down the AMC, unregisters the client devices, the bus notifier and the adapter platform device, but it never drains i2c->work. A work item that is still queued or running when the adapter is unregistered dereferences i2c->adapter in i2c_new_client_device() after platform_device_unregister() has released the adapter. The work item is also embedded in the devm-allocated struct xe_i2c, so a work item still queued after the drm device devm unwind frees that allocation runs its callback on freed memory. The bus notifier is the only thing that schedules this work, and it is unregistered after the client devices. An instance that is still queued when the teardown runs can therefore write i2c->client[XE_I2C_CLIENT_AMC] while the loop is unregistering and clearing the same array, and an AMC client it instantiates late is only cleaned up by the adapter's own child sweep in i2c_del_adapter(). Move bus_unregister_notifier() in front of the client teardown loop and cancel the work right after it, so no new instance can be scheduled and a queued instance is drained before the client array is touched. A running instance still finds a live adapter, since the adapter is unregistered later. (cherry picked from commit a23f27d5ec11c3f418c5e5531eea34ccda2b5b20)

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate userspace queue count against initialized firmware slot count In panthor_drv.c:panthor_ioctl_group_create(), the queue count is validated against the hardcoded maximum: if (!args->queues.count || args->queues.count > MAX_CS_PER_CSG) return -EINVAL; However, if the firmware reports fewer slots than MAX_CS_PER_CSG, panthor_fw_init_ifaces() will only initialize that smaller number of stream interfaces. If unprivileged userspace requests more queues than the firmware reported (but no more than MAX_CS_PER_CSG), cs_slot_prog_locked() fetches an uninitialized stream interface and may crash when dereferencing cs_iface->input->ringbuf_base.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Size page table preallocation by device address Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for map() interface") passed the device address to pvr_mmu_op_context_create(), but the preallocation is still sized from device_addr + sgt_offset with an exclusive end. The offset into the object's pages has no place in a device-virtual range, and the exclusive end allocates one table too many when the range ends on a table boundary. Count the tables from device_addr and the inclusive end of the range. The new calculation does not take page table indices into account. This fixes another issue with the previous implementation, where the difference between start and end indices could underflow when a mapping crossed a page table boundary. This would lead to the driver preallocating a huge number of MMU pages, exhausting system memory and triggering an out of memory panic. [Alessio: add paragraph to point out OOM bug being fixed, cc stable]

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206)

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: free the skb when the DLC has no owner rfcomm_recv_data() hands the skb to d->data_ready() and returns 0 without freeing it, so the callback owns the skb from that point on. The tty implementation frees it when the DLC has been detached from its device: static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) { struct rfcomm_dev *dev = dlc->owner; if (!dev) { kfree_skb(skb); return; } The socket implementation returns without freeing it, and the skb is leaked. A connected DLC can have no owner: rfcomm_sock_destruct() clears d->owner, while the DLC itself stays on the session until it is closed. Data frames that arrive in that window still find d->state == BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one leaked skb each. The leak does not stop on its own either. The remote runs out of credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only place that sets it is rfcomm_sk_data_ready() itself, below the return. rfcomm_process_dlcs() keeps granting credits, so the remote keeps sending and the leak keeps growing. Free the skb, as the tty side does.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: scsi: ch: Do not keep references to data transfer element devices ch_readconfig() looks up the scsi_device of every data transfer element whose SCSI id the changer reports in READ ELEMENT STATUS, and stores it in ch->dt[]. scsi_device_lookup() takes a reference, and nothing ever drops it: ch_destroy() frees the array with kfree(). ch->dt[] is read nowhere else - it only supplies the vendor, model and revision printed in the same loop. Once such a drive is removed, its scsi_device can never be released. It stays on the host's device list at its address, so a new device there is refused by anything that walks the list - target_core_pscsi reports "scsi_device_get() failed for H:C:T:L" - and the low-level driver's module can no longer be unloaded. Only a reboot recovers. It shows with any changer that reports its drives' ids; with the mhvtl virtual library (IBM 3573-TL personality), each create and remove of a library with four drives leaves four references behind, counted by the module's use count in lsmod. With ch not bound the count is unchanged, and with this patch applied it is unchanged too. Drop the reference as soon as the name has been printed, and remove the now unused dt[] array. That also removes the array leaked when ch_probe() fails after ch_readconfig(). The same leak was reported with an RFC patch in 2022, which was not merged.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: regulator: of: fill in supply names in of_regulator_bulk_get_all() of_regulator_bulk_get_all() returns an array it allocated itself, and fills in only the consumer of each entry. Every other way of getting a bulk array has the supply name set, because the caller provides it, and the core expects it to be there: regulator_bulk_enable() prints it when a supply fails to enable, so a caller that hands such an array to it dereferences uninitialised memory on that path. Copy each name into the array's own allocation, right behind the entries, so that it shares the array's lifetime and callers still have nothing extra to free. That also retires the fixed 64 byte stack buffer the names were assembled in, which is_supply_name() never bounded the copy against.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: regulator: ltc3676: don't read the write-only HRST and CLIRQ registers HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST triggers a hard reset of the chip and writing CLIRQ clears the interrupt; reading them returns nothing useful, and the read itself fires the command. The result is that a plain register dump resets the board: cat /sys/kernel/debug/regmap/2-003c/registers walks every readable register, hits HRST, and the board reboots. Split the callback back in two so HRST and CLIRQ stay writable but are no longer readable. The readable range is left unchanged (LTC3676_BUCK1 ... LTC3676_IRQSTAT).

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all() of_regulator_bulk_get_all() allocates the consumers array and hands it to the caller, who is expected to free it at an appropriate time. pwrseq-pcie-m2.c never did, leading to a memory leak. Add an explicit kfree() for the consumers array.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc]

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix soft lockup in the netlink flow dump A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: team: stop reusing skb after queue override A nonzero dev_queue_xmit() result does not return ownership of the skb. When an override port's qdisc drops it, the queue override helper used to try another port or the mode transmit op with the freed skb. Return the handoff decision separately from transmit success. Select only the first override port under RCU and stop after handing it the skb, regardless of the lower transmit result. Keep the existing success and drop accounting. BUG: KASAN: slab-use-after-free in sk_skb_reason_drop Write of size 4 by task poc/5040 sk_skb_reason_drop (net/core/skbuff.c:1240) dev_kfree_skb_any_reason (net/core/dev.c:3470) ab_transmit (drivers/net/team/team_mode_activebackup.c:49) team_xmit (drivers/net/team/team_core.c:1849) __dev_direct_xmit (net/core/dev.c:4934) Freed by task 5040: __tcf_kfree_skb_list (net/sched/sch_generic.c:43) __dev_queue_xmit (net/core/dev.c:4831) team_xmit (drivers/net/team/team_core.c:1846) Kernel panic - not syncing: KASAN: panic_on_warn set ...

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop In the dmaengine path the driver pre-submits RX buffers and holds in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync() aborts these descriptors without running their callbacks, and the driver then frees only the ring shells, leaking every SKB still owned by the engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted per channel, the mapping leak can eventually exhaust a limited IOMMU aperture. Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a slot that still owns a live, DMA-mapped buffer, and on stop unmap and free every such buffer. axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on each completion, so it can race axienet_stop(): a completion may submit a fresh buffer after dmaengine_terminate_sync() has returned, leaving the channel armed with a buffer the teardown then frees while the engine may still write into it (dma_release_channel() does not stop it either). Add a lock that axienet_dma_rx_cb() holds across the @stopping check and the resubmit, and axienet_stop() holds to set @stopping before terminating. Once @stopping is set no callback can arm a new buffer, and any armed just before is aborted by the terminate, so teardown only frees buffers the engine no longer owns.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: sparx5: free the matchall entry on destroy sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for every offloaded matchall filter and adds it to sparx5->mall_entries. sparx5_tc_matchall_destroy() removes the entry from the list, but never frees it, so the entry of every deleted mirror and goto matchall filter is leaked. Free the entry after unlinking it. The leak was discovered by an AI code review agent, and reproduced with kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and deleting matchall mirror and goto filters. With the fix, kmemleak no longer reports the leak.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net: bridge: avoid recursive multicast port cleanup br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: net/packet: guard the ll header push in packet_rcv_spkt() packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: <IRQ> skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-sprd: disable runtime PM on remove sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does not perform the corresponding runtime PM cleanup. The probe failure path disables runtime PM before disabling the clocks, but the normal remove path directly disables clocks that are also managed by the runtime PM callbacks. If the device is runtime suspended, those clocks may already be disabled. Resume the device before removal, disable runtime PM and drop the temporary runtime PM reference before disabling the clocks. This issue was found by manual code inspection.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: mmc: mtk-sd: Cancel request timeout work on remove The driver queues req_timeout while a request is active. msdc_request_done() uses cancel_delayed_work(), which does not wait for a timeout callback that has already started. The timeout callback calls mmc_request_done(), which wakes the request waiter, and then continues to use host->dev_comp and check the SDIO IRQ. During unbind, msdc_drv_remove() can return and the managed mmc_host can be freed before the callback finishes. KASAN reported use-after-free accesses in msdc_request_done() and msdc_recheck_sdio_irq() in each of three unbind tests. The same tests completed without a kernel diagnostic after this change. Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new requests and before the driver releases the host resources.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: dm: fix reading free memory in do_resume When do_resume calls dm_table_get_mode(new_map), the call is done without holding any locks (it only holds a reference to the md). It may be possible that another concurrent ioctl on the same device will swap table after dm_swap_table and before dm_table_get_mode. In this case, dm_table_get_mode(new_map) reads freed memory. This race condition was triggered by syzbot. This commit fixes the race by reading mode of the new table before dm_swap_table. Note that new_map is also passed to dm_ima_need_measure, but this function doesn't attempt to dereference it, so this call should be safe. Note that this is not a security bug because only root can trigger it and the commonly used tools such as lvm or cryptsetup do not call the ioctls concurrently, so that they can't trigger it acceidentally.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix add_key() race with keyring restriction __key_create_or_update() snapshots keyring->restrict_link before taking the destination keyring's semaphore. keyring_restrict() installs a restriction while holding that semaphore. This allows a writer to observe no restriction, wait for the keyring owner to install a reject-all restriction and return successfully, and then link a key using the stale NULL snapshot. The writer only needs write permission on the destination keyring. Move the restrict_link read after __key_link_lock() and __key_link_begin(). The read and the subsequent restriction check are then serialized with restriction installation by keyring->sem. The race was reproduced on v7.2.8 in 19 executions where restriction installation returned before the link completed. All 19 linked the key despite the reject-all restriction. With this change, 312 executions reached the same ordering and every add_key() call failed with -EPERM. The issue was found by manual concurrency analysis assisted by AI-based analysis and independently verified with a QEMU reproducer and kernel instrumentation.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ip6_gre: remove obsolete ERSPAN PMTU update A tc tunnel_key action can attach a METADATA_IP_TUNNEL dst to an skb, and mirred can redirect it to a native ip6erspan device. The legacy PMTU update in ip6erspan_tunnel_xmit() treats that metadata dst as a route. Since it has no output device, dst_dev(dst)->mtu dereferences NULL. On v7.2 with KASAN, an initial UID/GID 65534 process with CapEff 0 used self-created user and network namespaces to trigger: KASAN: null-ptr-deref RIP: ip6erspan_tunnel_xmit+0x10fc/0x2cc0 Kernel panic - not syncing: Fatal exception in interrupt The update is obsolete. Commit fe1a4ca0a2b7 ("ip6_gre: process toobig in a better way") changed IPv6 GRE Too Big handling to update the underlay route and removed the equivalent block from __gre6_xmit(). ip6_tnl_xmit() then propagates the underlay PMTU to the overlay route. Remove the stale ERSPAN copy and its now-unused dst variable. This eliminates the metadata-dst dereference and keeps ERSPAN aligned with IPv6 GRE PMTU handling.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ice: fix metadata_dst refcount handling on representor teardown ice_eswitch_release_repr() uses metadata_dst_free() to release the representor's metadata_dst. metadata_dst_free() directly frees the underlying memory without checking the dst_entry refcount. When ice_eswitch_port_start_xmit() processes a packet, it takes a reference via dst_hold() and attaches the metadata_dst to the skb. If the representor is torn down while packets are still queued on the lower device (e.g. in a qdisc), the metadata_dst is freed while references are still held. Use dst_release() instead, which correctly decrements the refcount and only frees the object when all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. Other drivers sharing this pattern (nfp, airoha, bnxt) already use dst_release() for their metadata_dst lifecycle.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ice: fix use-after-free in dynamic port cleanup ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic port from pf->dyn_ports. However, it frees the VSI before reading the index for the erase, resulting in a use-after-free. Follow the reverse of the allocation order in ice_alloc_dynamic_port() by erasing the xarray entry before freeing the VSI.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and xgpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so xgpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DMABUF and IOURING net_iov types while leaving page-backed checks unchanged. With the guard, the same queue copied the readable prefix, returned a 4096-byte skip hint, and completed without a fault.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: xen/netfront: don't leak the skb when xennet_fill_frags() fails When a response chain has more slots than fit in the skb's frags, xennet_fill_frags() returns an error and xennet_poll() jumps to its error path. That path moves what's left on tmpq to errq to be freed, but the skb being filled was already dequeued from tmpq, so it's never freed. Each chain that overflows leaks the skb and the pages attached to it as frags, and the backend decides how many slots it sends. Put the skb back on tmpq before taking the error path, like the xennet_set_skb_gso() failure just above it does.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in chained work check current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured the third request over the air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer also completed without a reset.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P device removal race in brcmf_detach() When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and freed. The second list_del_rcu() of wdev->list faults on LIST_POISON2: brcmfmac: brcmf_p2p_del_vif delete P2P vif brcmfmac: brcmf_p2p_deinit_discovery enter brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared brcmfmac: brcmf_detach Enter brcmfmac: brcmf_bus_change_state 1 -> 0 brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed [1.5 s later, brcmf_p2p_del_vif() timed out] brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed Unable to handle kernel paging request at virtual address dead000000000122 Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] Call trace: _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] cfg80211_unregister_wdev+0x10/0x1c [cfg80211] brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac] brcmf_remove_interface+0x1f4/0x254 [brcmfmac] brcmf_detach+0x88/0x180 [brcmfmac] brcmf_sdio_remove+0x90/0x7b0 [brcmfmac] brcmf_sdiod_remove+0x20/0xa0 [brcmfmac] brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac] sdio_bus_remove+0x38/0x144 device_release_driver_internal+0x1e8/0x2c0 device_release_driver+0x14/0x20 brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac] brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac] __exit_compat+0x18/0x418 [brcmfmac_cyw] __arm64_sys_delete_module+0x1ac/0x244 The log was taken with debug=0x406 on an i.MX 8M Plus board with a CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same in mainline. To reproduce: 1. Start wpa_supplicant on wlan0 and let it associate. It creates the P2P device (iw dev shows "type P2P-device"). 2. Stop wpa_supplicant and remove the driver without waiting for wpa_supplicant to exit: kill $(pidof wpa_supplicant) rmmod brcmfmac_cyw brcmfmac The crash is reproducible on that board. For the interface without a netdev (the P2P device), take RTNL and the wiphy mutex in brcmf_detach() before reading iflist, and remove it with locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev any more. The interfaces with a netdev are removed as before, because brcmf_del_if() takes RTNL on its own for the primary interface.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: dm ioctl: don't let data_start run past the buffer struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus() With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset hotplug operation becomes synchronous. That commit also removes the code that handles race between cpuset_hotplug_work and cpu hotplug notifier with the assumption that race is now gone. Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask") updates the cpuset code to always use cpu_active_mask instead of cpu_online_mask in some places including guarantee_online_cpus() which is renamed to guarantee_active_cpus() in that commit. In the case of CPU offline operation, cpu_active_mask is updated first in sched_cpu_deactivate() to remove the offline CPU before cpuset_handle_hotplug() is called to update the effective_cpus of the affected cpusets. The cpu_online_mask is updated after that near the end of the offline operation to remove the offline CPU. As a result, the race comes back and the top cpuset may not have any active CPU leading to NULL pointer dereference during the race window when guarantee_active_cpus() is called after cpu_active_mask is updated to remove the CPU to be torn down but before cpuset_handle_hotplug() is able to properly update the effective_cpus of the top cpuset. Fix this by adding back the NULL cs check to avoid this problem.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: can: dev: init_can_skb(): restore skb header initialization Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") removed the skb_reset_mac_header()/skb_reset_network_header()/ skb_reset_transport_header() calls from init_can_skb(). As a result, RX skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF. When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length calculation overflows and triggers skb_under_panic -> kernel BUG -> full machine panic. The same issue was originally reported in 2014 on linux-can and fixed by commit 969439016d2c ("can: add missing initialisations in CAN related skbuffs"). packet_rcv_spkt() itself has never been hardened: only packet_rcv() and tpacket_rcv() gained dev_has_header() checks in commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header").

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix memory leakage when clearing DAO input mappers Commit e576e7843c0d ("ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions") centralized the DAO input mapper clearing logic in dao_clear_input(), but omitted the kfree() calls. It removes the mapper entries from the list and sets their pointers to NULL without freeing the allocated array. This leaks memory each time dao_clear_input() is called. Store the base pointer of the allocation before clearing the mapper entries and free the array after removing entries from the list.

Keep an eye · NVD Record

In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data.

Keep an eye · NVD Record